Manrose Low Voltage Fan Range – the Manrose SELV – Features

• A Centrifugal 12 Volt fan is available, fitted with a backward curved centrifugal impeller for large airflow against the high pressures caused by longer lengths of ducting and resistance by grilles.
• The extract rate of the 100mm (4″) model is 85m3/hr 23 litres a second, the 120mm (5″) 130m3/hr 36 litres per second and the 150mm 230m3/hr 64 litres per second.
• The CF200LV centrifugal fan has an extract rate of 110m3/hr 31 litres per second.
• The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
• Power is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
• Designed to exceed the 2006 Building Regulations on Ventilation (F1), rated to IP44.
• Electrical data:
  12 volts AC. – 50Hz. 14W on XF/WF100, 20W on XF/WF120LV, XF/WF150BLV and CF200LV. Supplied by a remote safety isolating transformer – Manrose type T12 series.

Manrose SELV Fans – Available 12v fan Models

• The Manrose XF100LV/XF100ALV – Wall or ceiling mounted /Automatic wall or ceiling SELV extractor fan;
• The Manrose WF100LV/WF100ALV – Window mounted /Automatic window SELV extractor fan;
• The Manrose XF120LV/XF120ALV – Wall or ceiling mounted /Automatic wall or ceiling SELV extractor fan;
• The Manrose WF120LV/WF120ALV – Window mounted /Automatic window SELV extractor fan;
• The Manrose XF150BLV/XF150ALV – Wall or ceiling mounted /Automatic wall or ceiling SELV extractor fan(Uses LT12 Transformer);
• The Manrose WF150BLV/WF150ALV – Window mounted /Automatic window SELV extractor fan(Uses LT12 Transformer);
• The Manrose CF200LV – Wall or ceiling SELV extractor fan(Uses LT12 Transformer).

In the image above, there are two graphs – the Performance Graphs from Manrose(the 12V extractor fans). Here are the performance graphs data:

• (A) XF/WF100LV 85m3/hr, 23 litres per second
• (B) XF/WF120LV 130m3/hr, 36 litres per second
• (C) XF/WF150BLV 230m3/hr, 64 litres per second
• (D) CF200LV 110m3/hr, 31 litres per second

Remember, if you want to purchase Manrose Low Voltage – actually Safety Extra Low Voltage – Extractor fans, visit the Manrose Extractor fans and choose the right model. If you want a certain model that is not on the website, do not hesitate to contact us.

Read more below about the main features, the extractor fan models in these ranges, and more installation/electrical data.

Manrose 9inch / 12inch Window Fans – Commercial Solutions

• Suitable for a variety of domestic and commercial applications, the Manrose WF230 range has been designed for window or wall mounting.
• Incorporating the latest ventilation technology and stylish design, these high performance WF230 extractor fans have an extract rate of 668m3/hr, 185 litres per second.
• There are three models in the range starting with the basic unit (Manrose WF230) which has fixed louvres, can be supplied with an optional pullcord switch and provides a natural source of trickle flow ventilation when the fan is switched off.
• The manual models (the Manrose WF230M) have pullcord operated internal backdraught shutters that also start the fan.
• The Manrose WF230 automatic series have thermo-activated shutters which open silently 45 seconds after the fan has been switched on.
• Completing the Manrose family – the Manrose WF300 range of 300mm (12″) fans give a powerful extract rate of 1100m3/hr, 306 litres per second.
• The WF300 extractor fan is designed for window mounting and can also be wall mounted using our wall mounting fixing kit.
• The Manrose WF300 range has three models in its range. The basic model with fixed louvres, the manual model with internal pullcord operated backdraught shutters and the automatic model with thermoactivated internal shutters which open silently and automatically when the fan is switched on(see below for more details).
• These high performance extractor fans are easy to install and are attractively styled in high gloss ABS thermoplastics for durability, ease of cleaning and maintenance and cover a wide variety of domestic and commercial applications including kitchens, utility rooms, pubs, restaurants, offices, shops and factories.
• The units are all manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
• Power is provided by a four pole single phase induction motor with pre-oiled bearings, totally enclosed for protection against dust and dirt, for a long, maintenance-free life.
• There is an extensive range of ventilation accessories including speed controllers and rooftermination kits, available separately.
• Building Regulations on Ventilation (F1).
• More specific technical details – Manrose WF230
  - Maximum pressure: 50 p.a.;
  - Fan speed: 1250 r.p.m.;
  - Sound volume: 50.0 dB(A);
  - Maximum operating temperature: 40ºC.
• More specific technical details – Manrose WF300
  - Maximum pressure: 60 p.a.;
  - Fan speed: 1300 r.p.m.;
  - Sound volume: 60.0 dB(A);
  - Maximum operating temperature: 50ºC.

The Manrose 9inch and 12inch window fan range – the models

• The Manrose WF230 range
  - Manrose WF230 – Basic model has fixed louvres. This unit will also provide a natural source of trickle flow ventilation when the fan is switched off
  - Manrose WF230P – As above with pullcord switch
  - Manrose WF230MP – The manual models have pullcord operated internal backdraught shutters, which also start the fan motor unit
  - Manrose WF230A – The automatic versions have thermo-activated shutters which open silently approximately 45 second after the fan has been switched on Basic model has fixed louvres.
• The Manrose WF300 range
  - Manrose WF300 – This unit will also provide a natural source of trickle flow ventilation when the fan is switched off
  - Manrose WF300P – As above with pullcord switch
  - Manrose WF300MP – The manual models have pullcord operated internal backdraught shutters, which also start the fan motor unit
  - Manrose WF300A – The automatic versions have thermo-activated shutters which open silently approximately 45 second after the fan has been switched on

The WF300 series 5 pin connector plug also ensures simple electrical connection without additional wiring.

Manrose Window/Wall Fans – Installation details & Electrical data

• The Manrose WF230 series has been designed for window installation through a standard 260mm Ø hole. A wall fixing kit (Cat. No. 1301 is also available for through wall mounting and comprises wall plugs, screws and a 400mm length of 9″ diameter aluminium flexible ducting (when extended).
• The Manrose WF300 series has been designed to be fitted in a window through a standard 320mm Ø hole. A wall fixing kit Cat. No. 1299 is also available for through wall mounting which comprises of wall plugs, screws and a 400mm length of 12″ diameter aluminum flexible ducting (when extended).
• More Electrical Data
  - 220-240V – AC. 50Hz.
  - Single phase consuming 41W on the 230 series and 82W on the Manrose WF300 series.
  - These fans are double insulated and do not require an earth.
  - All wiring must comply with the current IEE regulations.
  - A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
  - The fan should NOT be accessible to a person using either the shower or bath and mounted a minimum of 1.8m from the floor.

Buy online these window/wall extractor fans – the Manrose WF230 range and the Manrose WF300 range – via sparksdirect – Heating & Ventilation, Ventilation Solutions, Manrose Extractor Fans.

Manrose Low Profile extractor fans

Find out more in the article below about the features, the range, the performance graph, the electrical data, and the dimensions of the Manrose Lo Profile range of Extractor Fans.

Manrose Lo Profile Extractor Fans – Features

• Long life motor.
• Only 10mm profile.
• Easy to install & maintain.
• Designed for Wall or Ceiling Mounting. Designed to comply with the 2006 building regulations on ventilation (F1).
• Available in White, Brass and Chrome with Square or Circular Front Covers.
• Quiet and efficient, the Lo Profile Fans have extraction rates of 85m3/hr or 23 litres per secont – 100mm(4″).
• 130m3/hr or 36 litres per second – 120mm (5″) 230m3/hr or 64 litres per second – 150mm (6″).

More Lo Profile Range Specific Features

• The Manrose Lo Profile 100mm (4″) Range
  - Maximum pressure: 20 p.a.;
  - Fan speed: 2400 r.p.m.;
  - Sound volume: 41.0 dB(A);
  - Maximum operating temperature: 40ºC.
• The Manrose Lo Profile 120mm (5″) Range
  - Maximum pressure: 35 p.a.;
  - Fan speed: 2000 r.p.m.;
  - Sound volume: 41.0 dB(A);
  - Maximum operating temperature: 40ºC.
• The Manrose Lo Profile 150mm (6″) Range
  - Maximum pressure: 50 p.a.;
  - Fan speed: 2400 r.p.m.;
  - Sound volume: 40.0 dB(A);
  - Maximum operating temperature: 40ºC.

The Extractor Fans in the Manrose Lo Profile range

Manrose Lo Profile Square Front Cover

• Manrose LP100 / LP120 / LP150SSW – Low Profile Standard model for remote switching – White;
• Manrose LP100 / LP120 / LP150SSB – Low Profile Standard model for remote switching – Brass;
• Manrose LP100 / LP120 / LP150SSC – Low Profile Standard model for remote switching – Chrome;
• Manrose LP100 / LP120 / LP150STW – Low Profile Timer model incorporating integral adjustable electronic timer (1-20 mins) – White;
• Manrose LP100 / LP120 / LP150STB – Low Profile Timer model incorporating integral adjustable electronic timer (1-20 mins) – Brass;
• Manrose LP100 / LP120 / LP150STC – Low Profile Timer model incorporating integral adjustable electronic timer (1-20 mins) – Chrome;
• Manrose LP100 / LP120 / LP150SLVW – Low Profile STD (low voltage) – White;
• Manrose LP100 / LP120 / LP150SLVB – Low Profile STD (low voltage) – Brass;
• Manrose LP100 / LP120 / LP150SLVC – Low Profile STD (low voltage) – Chrome;

Manrose Lo Profile Circular Front Cover

• Manrose LP100 / LP120 / LP150CSW – Low Profile Standard model for remote switching – White;
• Manrose LP100 / LP120 / LP150CSB – Low Profile Standard model for remote switching – Brass;
• Manrose LP100 / LP120 / LP150CSC – Low Profile Standard model for remote switching – Chrome;
• Manrose LP100 / LP120 / LP150CTW – Low Profile Timer model incorporating integral adjustable electronic timer (1-20 mins) – White finish;
• Manrose LP100 / LP120 / LP150CTB – Low Profile Timer model incorporating integral adjustable electronic timer (1-20 mins) – Brass finish;
• Manrose LP100 / LP120 / LP150CTC – Low Profile Timer model incorporating integral adjustable electronic timer (1-20 mins) – Chrome finish;
• Manrose LP100 / LP120 / LP150CLVW – Low Profile STD (low voltage) – White;
• Manrose LP100 / LP120 / LP150CLVB – Low Profile STD (low voltage) – Brass;
• Manrose LP100 / LP120 / LP150CLVC – Low Profile STD (low voltage) – Chrome;

The Manrose Lo Profile Extractor Fans Performance Graph

• (A) The Manrose LP100 Series – extracts 85m3/hr, 23 litres per second;
• (B) The Manrose LP120 Series – extracts 130m3/hr, 36 litres per second;
• (C) The Manrose LP150 Series – extracts 230m3/hr, 64 litres per second.

Manrose Lo Profile Electrical Data

• Power Supply: 220-240V – AC. 50Hz .
• Single phase consuming 14 watts (100mm) and 17 watts (120/150mm).
• These fans are double insulated and do not require an earth.
• All wiring must comply with current IEE regulations.
• A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
• This extractor fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.
• The Manrose Lo Profile was designed for wall or ceiling mounting through either 100mm(4″), 120mm(5″), 150mm(6″) diameter flexible or rigid pipes or Manrose low profile, flat channel ducting systems.

Manrose Lo Profile Extractor Fans – the Dimensions

• Manrose Lo Profile LP100S – height/width 140mm, depth 100mm, above the wall/plaster 10mm, cutout diameter 98mm Ø;
• Manrose Lo Profile LP100C – diameter 140mm Ø, depth 100mm, above the wall/plaster 10mm, cutout diameter 98mm Ø;
• Manrose Lo Profile LP120S – height/width 161mm, depth 122mm, above the wall/plaster 10mm, cutout diameter 118mm Ø;
• Manrose Lo Profile LP120C – diameter 165mm Ø, depth 122mm, above the wall/plaster 10mm, cutout diameter 118mm Ø;
• Manrose Lo Profile LP150S – height/width 191mm, depth 122mm, above the wall/plaster 10mm, cutout diameter 150mm Ø;
• Manrose Lo Profile LP150C – diameter 198mm Ø, depth 122mm, above the wall/plaster 10mm, cutout diameter 150mm Ø.

Buy online extractor fans from this Low Profile Manrose range – the Manrose Lo Profile – via SparksDirect – Heating & Ventilation, Ventilation Solutions, Manrose Extractor Fans (especially the Manrose LP100CT 100MM Circular Low Profile Fan With Integral Adjustable Electronic Timer and the Manrose LP100STC 100MM Square Low Profile Extractor Fan With Integral Adjustable Electronic Timer).

• Being available either as single fan units or in a kit form, the Manrose XF/XP150 range of window extractor fans is ideally suited for use in domestic and commercial applications including kitchens, utility rooms, restaurants, hotels, offices and shops.
• The Manrose WF150 range especially is suitable for window mounting – Manrose window fan.
• All the Manrose 6″ axial window fan units are manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
• The power supply is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
• This range of Manrose window extractor fans is designed to comply with the 2006 Building Regulations on Ventilation (F1).

The Manrose 6″ Window Fans, the existing models

Manrose Wall/Ceiling Fans and Packs – Base axial window fan model with fixed internal grille

• Manrose XF150/XP150 – Standard axial window fan model for remote switching;
• Manrose XF150P/XP150P – Just like XF150/XP150, but with pullcord switch;
• Manrose XF150T/XP150T – Timer axial window fan model incorporating integral adjustable electronic timer (1-20 mins);
• Manrose XF150H/XP150H – XF150/XP150 axial window fan with humidity control which is adjustable between 40 and 95%RH. Complete with integral adjustable timer (1-20 mins);
• Manrose XF150HP/XP150HP – Electronic humidity control with pullcord override switch. Requires no switched live.

Manrose Wall/Ceiling Fans and Packs – Automatic model with internal shutters

• Manrose XF150A/XP150A – Standard window extractor fan with internal shutter model for remote switching;
• Manrose XF150AP/XP150AP – Just like XF150AP/XP150AP, but supplied with pullcord switch;
• Manrose XF150AT/XP150AT – Timer window extractor fan with internal shutter model incorporating integral adjustable electronic timer (1-20 mins);
• Manrose XF150AH/XP150AH – XF150AP/XP150AP window extractor fan with internal shutter Humidity control which is adjustable between 40 and 95%RH. Complete with integral adjustable timer (1-20 mins);
• Manrose XF150AHP/XP150AHP – window XF150AP/XP150AP extractor fan with internal shutter with electronic humidity control with pullcord override switch. Requires no switched live.

Manrose Window Fans – Basic model with fixed grilles

• Manrose WF150 – Standard basic model with fixed grilles;
• Manrose WF150P – Pullcord basic model with fixed grilles;
• Manrose WF150T – Timer window extractor fan with fixed grill model complete with pullcord;
• Manrose WF150H – WF150 window extractor fan with fixed grill with humidity control complete with pullcord.

Manrose Automatic Window Fan model with internal shutters

• Manrose WF150A – Standard window fan with internal shutters model;
• Manrose WF150AP – Pullcord window fan with internal shutters model;
• Manrose WF150AT - Window fan with internal shutters model with timer and complete with pullcord;
• Manrose WF150AH – Window fan with internal shutters with humidity control complete with pullcord.

More about the Installation / features of the Manrose 6 inch window fans

• The Manrose XF150/XF150A series of 150mm (6″) window extractor fans can be wall or ceiling mounted (not the pullcord models), and there are two models available in this range. The Manrose XF150 model has a fixed louvre internal grille, while the automatic model – the XF150A – has thermo-activated internal shutters which open 45 seconds after the fan has been switched on (except the manual pullcord operated model Manrose XF150AP).
• The Manrose XP150/WF150A – This series has been designed for through wall fixing and is supplied complete with aluminium flexible ducting and wall grille. The Manrose XP150/150A series of 150mm (6″) extractor fans can be wall mounted, and there are two models available in this range. The XP150 model has a fixed louvre internal grille, whilst the automatic model the XP150A, has thermoactivated internal shutters which open 45 seconds after the fan has been switched on (except the manual pullcord operated model Manrose XP150AP).
• The Manrose WF150/WF150A - This series has been designed for window or wall fixing through a standard 184mm (71 4″) hole.
  Note: for wall fixing, please use the FK1 wall vent kit Cat No. 1300. There are three variations in this range, the base model with fixed louvres for additional trickle flow ventilation, and the manual model has external gravity backdraught shutters. The automatic model incorporates thermoactivated internal shutters (except the pullcord operated model WF150AP).

More Technical features of the Manrose 150mm window fans

• 220-240V – AC. 50Hz.
• Single phase consuming 17W on the 150 series and 20W on the 150A automatic models.
• These fans are double insulated and do not require an earth.
• All the wiring must comply with the current IEE regulations.
• A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
• The fan should not be accessible to a person using either the shower or bath and mounted a minimum of 1.8m from the floor.
• Maximum pressure: 50 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 40.0 dB(A)
• Maximum operating temperature: 40ºC

To purchase the above introduced Manrose Window Fans (similar with yet slightly different than the Manrose 150mm kitchen extractor fans), please follow/visit the supplied links – or view our full Manrose offer of extractor fans – online.

These Manrose extractor fans are suited for larger bathrooms, utility rooms, shops, offices, restaurants, etc. The power supply is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life. The air extracting rate for the Manrose 150 extractor fan Series is 230m3/hr, 64 litres per second. And, by the way, by incorporating the latest technology and design in all its extractor fans, Manrose can now offer a complete family of 100mm (4″), 120mm (5″) and 150mm (6″) fans, all with the same styling. Some of the 150mm extractor fan models found on our website are the Manrose XF150, the Manrose XF150T, the Manrose WF150A, the Manrose WF150AT, etc.

All the units are manufactured using high gloss ABS thermoplastics for strength, durability, aesthetics and easy cleaning. They are designed to comply with the 2006 Building Regulations on Ventilation (F1). Read more below about some details of the installation of the 150mm extractor fans, some electrical details, some of the features, and the full range – the Manrose 150mm(6″) fan models.

Details about the Installation of the Manrose 150mm fans

• The Manrose XF150 Series – is designed for wall or ceiling mounting (pullcord wall-mounting only). A wall fixing kit is available separately – The SVK (1280).
• The Manrose XP150B Series – These extractor fans are designed for through wall fixing. They come complete with aluminium flexible ducting and a wall grille.
• The Manrose WF150B Series – These extractor fans are designed to be fitted in either a window or wall through a standard 184mm (71/4″) hole. A wall fixing kit – the Manrose FK1 (1300) – is available (it comprises of wall plugs, screws and a 400mm length of 6″ diameter aluminium flexible ducting – when fully extended).

Manrose 150mm Extractor Fans – Electrical Details

• 220-240V – AC. 50Hz.
• Single phase consuming 17 watts.
• These fans are double insulated and do not require an earth.
• All the wiring must comply with current IEE regulations.
• A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
• The fan should not be accessible to a person using either the shower or the bath and mounted a minimum of 1.8 metres from the floor.

More features of the Manrose 150mm (6″) Range

• Maximum pressure: 50 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 40.0 dB(A)
• Maximum operating temperature: 400C.
• Performance Graph: XF/WF/XP150B Series230m3/hr, 64 litres per second.
• Dimensions:
  - Manrose XF150 – 203×203mm front, 150mm diameter ducting, 95mm depth;
  - Manrose WF150 – 203×203mm front, front elevation, pull cord switch, depth inside the glass: 95mm, outside the glass/side elevation through the glass: 23mm
• Dimensions and more features: see the chart below.

Manrose 150mm Kitchen Extractor Fans – Existing Models / Ranges

• Manrose XF150 – Standard kitchen extractor fan model for remote switching;
• Manrose XF150P – Manrose XF150 supplied with a pullcord switch;
• Manrose XF150T – Timer model incorporating integral adjustable electronic timer (1-20 mins);
• Manrose XF150BTP – Manrose XF150T with a pullcord override switch. Requires no switched live;
• Manrose XF150BH – Includes a humidity control which is adjustable between 40% RH and 95% RH;
• Manrose XP150BH – Complete kitchen extractor fan with integral adjustable timer (1-20 mins);
• Manrose XF150BHP – Manrose XP150BH with pullcord override switch. Requires no switched live;
• Manrose XP150BHPIR – PIR activated extractor fan model with adjustable timer with presence detection, timer runs on when the room is vacated. There is no need to connect to a separate switch;
• Manrose XP150BPIR – Timer adjustable between 1-20 mins. Requires no switched live;
• Manrose XF150BMH – Electro-Mechanical Humidity Control with on/off switch adjustable 20 – 90% RH;
• Manrose XF150BMHP – Manrose XF150BMH with pullcord switch and neon light;
• Manrose XF150BMHT – As Manrose XF150MH but with electronic timer 150mm 6″ Window Fans;
• Manrose WF150BH – Extractor fan with pullcord switch;
• Manrose WF150BT – Electronic timer with pullcord override switch and neon light;
• Manrose WF150BH – Humidity control which is adjustable between 40% RH and 95% RH. Complete with integral adjustable timer (1-20 mins);
• Manrose WF150BPIR – PIR activated model with timer and presence detection, timer runs on when the room is vacated. There is no need to connect to a separate switch. Timer adjustable between 1-20 mins. Requires no switched live.

Buy online the Manrose Kitchen Extractor Fans – the 150mm fans – via sparksdirect.co.uk – Heating and Ventilation, Ventilation solutions – Manrose Extractor Fans.

• All the units are manufactured using high ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
• The power supply is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
• All the Manrose 4″ extractor fans are designed to comply with the 2006 Building Regulations on Ventilation (F1).
• Read more below about the ranges and models of 100mm domestic Extractor fans, installation tips, electrical data, technical details, and the dimensions – Manrose 100mm (4″) Extractor Fans.

Manrose 100mm extractor fans – Ranges and Models

Manrose 100mm (4″) Wall or Ceiling Fans

• Manrose XF100S - Standard model for remote switching;
• Manrose XF100P - As above supplied with pullcord switch;
• Manrose XF100T - Timer model incorporating integral adjustable electronic timer (1-20 mins);
• Manrose XF100TP - As above but with pullcord override switch. Requires no switched live;
• Manrose XF100MH - Electro-Mechanical Humidity Control with on/off Switch adjustable 20-90% RH;
• Manrose XF100MHP - Same as XF100MH but with pullcord switch and neon light;
• Manrose XF100MHT - As XF100MH but with Electronic Timer;
• Manrose XF100H - With humidity control which is adjustable between 40% RH and 95% RH; Complete with integral adjustable timer (1-20 mins)
• Manrose XF100HP - Same as XF100H but with pullcord override switch. Requires no switched live;
• Manrose XF100PIR - PIR activated model which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch Timer adjustable between 1-20 mins. Requires no switched live.

Manrose 100mm Extractor PAKS with aluminium flexible ducting and wall grille

• Manrose XP100S - Standard model for remote switching;
• Manrose XP100P - As above supplied with pullcord switch;
• Manrose XP100T - Timer model incorporating integral adjustable electronic timer (1-20 mins);
• Manrose XP100TP - As above but with pullcord override switch. Requires no switched live; Humidity control which is adjustable between 40% RH and 95% RH;
• Manrose XP100H - Complete with integral adjustable timer (1-20 mins);
• Manrose XP100HP - As above but with pullcord override switch. Require no switched live;
• Manrose XP100PIR - PIR activated model which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch Timer adjustable between 1-20 mins. Requires no switched live;

Manrose 100mm Window Fans

• Manrose WF100P - Pullcord extractor fan for window;
• Manrose WF100T – Timer window extractor fan incorporating integral adjustable timer (adjustable 1-20 mins); Complete with pullcord switch;
• Manrose WF100H - Includes humidity control which is adjustable between 40% RH and 95%; Complete with integral adjustable timer (1-20 mins);
• Manrose WF100PIR - PIR activated window extractor fan which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch. Timer adjustable between 1-20 mins. Requires no switched live;

About the Installation of the Manrose 100 mm/4 inch fans

• The Manrose XF100 Series – designed for wall mounting (pull-cord version wall mounting only) through 100mm (4″) diameter flexible or rigid pipes or Manrose low profile, flat channel ducting systems.
• The Manrose XP100 Series – designed for through-wall fixing, supplied with aluminium flexible ducting and external wall grille. Cut out for XP100 kits (112mm/41/2″).
• The Manrose WF100 Series – designed for window mounting through a standard 115 – 155mm diameter hole.

Electrical data about the Manrose 100mm fans

• Operating Voltage: 220-240V – AC. 50Hz.
• Single phase consuming 14 watts.
• These fans are double insulated and do not require an earth.
• All wiring must comply with current IEE regulations.
• A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
• The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

More Technical Details – Manrose 100mm Extractor Fans

• Maximum pressure: 20 p.a.
• Fan speed: 2400 r.p.m.
• Sound volume: 41.0 dB(A)
• Maximum operating temperature: 40ºC.
• Dimensions:
  - Manrose XF100T: front length/width 163mm, cutout diameter 98mm, depth 75mm, front plate depth 30mm;
  - Manrose XF100MH: front length/width 163mm, cutout diameter 98mm, depth 67mm, front plate depth 30mm;
  - Manrose XP100: face length/width 163mm, inside diameter 95mm, front plate depth 30mm, total depth 75mm, duct lenght 380mm
  - Manrose WF100: front length/width 163mm, depth 90mm, has a 4-10mm glass plate, 30mm from the front to the glass plate

sss

The Manrose Centrifugal Fans – Main Features

• There are seven models in each series – the CF100, CF200, and CF400(each one has 7 models).
  - The Manrose CF100 Centrifugal Fan has an extract rate of 90m3/hr 20 litres per second
  - The Manrose Centrifugal Fan CF200 range have an extract rate of 110m3/hr 31 litres per second.
  - The largest fan in the range, the Manrose CF400 Centrifugal Fan has a maximum performance of 230m3/hr, 64 litres per second.
• All the Centrifugal Fans from Manrose are manufactured using high impact ABS thermoplastics for strength and durability, aesthetics and easy cleaning.
• The power to the Manrose CF100/200 Centrifugal Fan range is provided by a single phase induction motor with pre-oiled bearings for a long, maintenance-free life.
• Being dynamically balanced, the Manrose Centrifugal Fan CF400 unit is fitted with external rotor motors which incorporate ball bearings for a maintenance free life of over 40,000 hours. These fans are also supplied with a 11mm thick washable fibre filter.
• All the Manrose Centrifugal Fans(the CF100, CF200 and CF400 ranges) are designed to comply with the 2006 Building Regulations on Ventilation (F1).

The Manrose Centrifugal Fans – Models/Ranges

• Manrose CF100S / CF200S / CF400S – Standard model for remote switching;
• Manrose CF100P / CF200P / CF400P – As above supplied with pullcord switch;
• Manrose CF100T / CF200T / CF400T – Timer model incorporating integral adjustable electronic timer (1-20 mins);
• Manrose CF100TP / CF200TP / CF400TP – Timer model incorporating integral adjustable electronic timer (1-20 mins), with pullcord override switch. Requires no switched live;
• Manrose CF100H / CF200H / CF400H – Humidity control which is adjustable between 40 and 95% RH; Complete with adjustable integral timer (1-20 mins);
• Manrose CF200HP / CF400HP – Electronic humidity control with pullcord override switch; Requires no switched live;
• Manrose CF100PIR / CF200PIR / CF400PIR – PIR activated model with adjustable timer for presence detection that will run on when room is vacated (1-20 mins). Requires no switched live.
• The available models are as seen below: Manrose CF100, Manrose CF200, and Manrose CF400.

Notes about: The Installation of the Manrose Centrifugal Fans

The Manrose Centrifugal fans are designed to be mounted on walls or ceilings and discharged through a 100mm (4″) standard rigid or flexible duct, and are also suitable for use with flat duct channel systems. Comprehensive wiring and installation instructions are included with each fan.

Notes about: The Electrical Data of the Centrifugal Fans from Manrose

• 220-240V – AC. 50Hz single phase consuming 17W on the CF100 range, 17W on the CF200 range and 45W on the CF400 range.
• These fans are double insulated and do not require an earth.
• All wiring must comply with current IEE regulations.
• A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3amp fuse fitted.
• The fan should not be accessible to a person using either the shower or bath and mounted to a minimum of 1.8 metres from the floor.

Additional Data about the Manrose Centrifugal Fan range

• The Manrose CF100 – Centrifugal Fans
  - Maximum pressure: 80 p.a.;
  - Fan speed: 1600 r.p.m.;
  - Sound volume: 42.0 dB(A);
  - Buy online Manrose CF100 Centrifugal Fans;
• The Manrose Centrifugal Fan CF200
  - Maximum pressure: 120 p.a.;
  - Fan speed: 1400 r.p.m.;
  - Sound volume: 45.0 dB(A);
  - Buy online Manrose CF200 Centrifugal Fans;
• The Manrose CF400 Centrifugal Fans
  - Maximum pressure: 300 p.a.;
  - Fan speed: 2335 r.p.m.;
  - Sound volume: 58.0 dB(A);
  - Buy online Manrose CF400 Centrifugal Fans;
• Maximum operating temperature: 89ºC.

Buy online the Manrose Centrifugal Fans – the Manrose CF100 / CF200 / CF400 – via the Manrose Extractor Fans section (Heating and Ventilation, Ventilation systems).

• The problems that can appear due to poor ventilation;
• Help – solving the lack of ventilation in the homes;
• Locate/site your fan correctly in the home;
• Choosing the proper / perfect fan for the best ventilation.

Some of the problems caused by poor ventilation

• Poor ventilation: Stale Air
  The stale air is usually caused by the cooking smells, people smoking, the odours remaining in the bathroom, a general lack of ventilation around the house as well as by a damp atmosphere. All these problems can cause an certain level of discomfort(which can be avoided!) as well as the risk of respiratory illness and general poor health.
• Poor ventilation: Condensation
  Problems can occur when the steam from the kitchen / the bathroom finds cooler surfaces around the house on which to condense. When we attempt to conserve the heat by sealing the windows – and therefore reducing the natural ventilation – we actually make this problem even worse. Condensation can cause some considerable problems from peeling wallpaper and mould growth to severe structural damage such as wood rot and damp.

Help in Solving the Problem Caused by the Lack of Ventilation

The Current Building Regulations

The Building Regulations Document F1 (2006 Edition) outlines the importance of ventilation and stipulates that mechanical ventilation must be installed in kitchens, bath/shower rooms and toilets. All the Manrose fans comply with or exceed current Building Regulations and are capable of extracting no less than 60 litres per second from kitchens and no less than 15 litres per second from bath/shower rooms. This means that the humidity is removed at source before it can reach the cooler part of the dwelling and cause damage.

Specific requirements of The Building Regulations Document F1 (2006 Edition) on ventilation

• The Building Regulations about the Bathrooms/Shower Rooms:
  The Regulations require a fan capable of minimum extract capacity of 15 litres per second 54m3/hr (32CFM) when installed.
• The Building Regulations about the Toilets (Separate from a Bathroom):
  The Regulations require a fan capable of a minimum extract capacity of 6 litres per second 21m3/hr (12CFM) when installed. N.B. If a room does not contain an openable window the fan should be fitted with a 15 minute over-run timer.
• The Building Regulations about the Kitchens:
  The Regulations require a fan capable of extracting 60 litres per second 216m3/hr (127CFM) when installed.
• The Building Regulations about the Utility Rooms:
  The Regulations require a fan capable of extracting 30 litres per second per second 108m3/hr (63CFM) when installed.

Where should we site the Manrose extractor fan?

• A fan should always be sited in the furthest window or wall from the main source of air replacement to avoid short-circuiting the airflow. It should be located as high as possible in the window or wall nearest to smells or steam, but not directly above eye-level grills or cooker hoods.
• If the room contains a fuel burning device (such as a gas boiler) with a non-balanced flue, it is essential that there is enough replacement air to prevent fumes being drawn down the flue when the fan is extracting to its utmost capacity.
• The IEE Regulations (U.K.) require that a conventional mains voltage fan in a bathroom or shower must be located where it cannot be touched by a person using the bath or shower and well away from any water spray.
• Alternatively, the new Manrose range of 12 volt S.E.L.V. (Safety Extra Low Voltage) fans are specifically designed for the safe ventilation of toilets, bathrooms and shower rooms and can be fitted within the splash area with absolutely no risk of electric shock.

Tips for Choosing the Right Manrose Fan

• The Manrose Axial Fans are designed to move air over short distances i.e. window fixing or through mounting and are not suitable for ducting over 2 metres in length. Available in 4″, 5″, 6″, 9″ and 12″ sizes.
• The Manrose Centrifugal Fans are designed to move air over longer distances and will perform well against the pressure caused by long lengths of ducting and resistance by grilles.
  Note: When ducting vertically it is recommended that a condensation trap is used.
• The Manrose Humidistat Controls – Manrose has a complete range of integral Humidistat Controls on all their fans, they are also available with a pullcord the bathroom and off as it falls. It will continue to monitor the humidity 24 hours per day, thus preventing mould growth on walls and ceilings and drastically reduces condensation problems.

Models of Manrose Fans

• Manrose Standard Fans: For remote switching through wall light or separate switch;
• Manrose Timer models: with built-in adjustable time delay operated by the light switch;
• Manrose Pullcord models: with built-in pullcord switch;
• Manrose Humidity controlled models: with built-in adjustable sensor which operates the fan automatically;
• Manrose P.I.R. model: sensitive to movement Switches on when room is entered and off when room is vacated.

To purchase online Manrose Extractor fans for kitchens, bathrooms, showers, etc – visit the Heating & Ventilation section, the Ventilation Solutions.

The Manrose Showerlite range of bathroom extractor fans

Available in three colours – white, brass and chrome – the Manrose Showerlite will enhance any shower or bathroom providing a rich warm glow of soft light. You can have both a shower light and an extractor fan in one – the ShowerLite range.

The Showerlite is available separately in boxed carton packaging or in blister packs with or without transformer. They are also available in a blister fan kit pack. Each pack is supplied complete with fan (available with or without timer), Showerlite unit, transformer, one length of PVC flexible ducting, external wall grille, fixing screws, plugs and straps. A centrifugal in-line fan kit is now available for longer ducting runs. Read more below about some of the features, the models available, and the typical installation of this Powerlite extractor fan.

ShowerLite Bathroom Extractor Fans – More Features

• The Showerlite Packaging
  Boxed in outers of 10. For packaging dimensions, contact the technical department.
• The Showerlite Installation
  Designed to be ceiling mounted through 102mm (4″) diameter flexible ducting or rigid pipes.
• Showerlite Electrical Details
  12 volt 35W dichroic 5.3 sealed lamp. Powered by a transformer T1250W. Input, AC. Output, 12 volt AC. 50 VA.
• The Showerlite Construction
  All plastic components are moulded in high temperature VO rated thermoplastics.
• The Showerlite Dimensions
  The SLW/B/C range, diameter 140mm, depth 74mm, inside/small diameter 98mm.

Manrose Showerlite Shower Fans – Models

• Manrose Showerlite 100MM Single Blister Pack Without Transformer:
  - SLW Showerlite white fitting – Manrose Showerlite 100MM Single Blister Pack Without Transformer ~ Finish: White;
  - SLC Showerlite chrome fitting – Manrose Showerlite 100MM Single Blister Pack Without Transformer ~ finish: Chrome;
• Showerlite In-Line Axial Extractor Packs Blister Packaging – Manrose 100MM Showerlite In-Line Axial Extractor Pack:
  - SLKSW Showerlite fan kit, standard model chrome fitting – Manrose 100MM Showerlite In-Line Axial Extractor Pack ~ Finish: Chrome;
  - SLKTW Showerlite fan kit, timer model white fitting – Manrose 100MM Showerlite In-Line Axial Extractor Pack ~ Finish: White;

Showerlite in-line Ventilation Fans, Extractor Fans – Installation