Blog Sparks Direct
Posts Tagged Lutron dimmers
Lutron LUT-LBX-CE Synthetic Minimum Load For use with Reverse and Forward Phase Dimmers
Posted by sparksdirect in ask Mr Sparks, electrical products, energy saving lights, guest expert, light dimmers, new technologies, products pictures, switches and sockets, technical data, website update on May 24, 2011
What is the Lutron LUT-LBX-CE? The Lutron LUT-LBX / LUT-LBX-CE is a Synthetic Minimum Load For use with Reverse and Forward Phase Dimmers. This device provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer’s minimum rating. Among its functions are the following:
- It presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller;
- This unit is required for all Lutron Light Dimmers if the total wattage of lamps on a circuit is below the minimum load required;
- Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers;
- Models available for 120 V and 220-240 V input power;
- This “load-side” equipment installs on the zone wiring in parallel with the lighting load;
- Use when switching very low power LED lamps as they are unlikely to meet the minimum 20 watts load required;
- Dissipates a maximum of 10 watts when the controlling dimmer is near high-end.
The LUTLBX / Lutron LUT-LBX-CE-WH Works with
- The Lutron GRAFIK Eye 3000® Series control units;
- The Lutron LP RPM Dimming Modules;
- The Lutron HomeWorks® RPM Dimming Modules;
- The Lutron HomeWorks® WPM Dimming Modules;
- The Lutron Neutral-referenced dimmers;
- The Lutron Two-wire dimmers.
The Lutron LUTLBX / Lutron LUT-LBX-CE-WH Technical Specs
- Input power:
# 100 mA 120 V 50/60 Hz (LUT-LBX);
# 65 mA 220-240 V 50/60 Hz (LUT-LBX-CE);
# Power dissipation less than 10 watts; - Sources/Load Types: Operates these sources when wired in parallel with the load: Incandescent (Tungsten), Halogen, Magnetic Low-Voltage Transformer, Electronic Low-Voltage Transformer, Lutron Tu-WireTM Electronic Fluorescent Dimming Ballast (LUT-LBX model only), Neon/Cold Cathode, LED lighting;
- Terminals: Accepts up to two #12 AWG (2.5 mm2) wires;
- Environment: 32 – 104 °F (0 – 40 °C). Relative humidity less than 90% non-condensing;
- Mounting: Surface or recess mount indoors only;
- Lamp Types: All Lamp Types, All Dimmable Circuits, All Switched Circuits;
- Voltage: 220-240 VAC 50/60Hz;
- Dimming Capacity: 20 watts (Synthetic Load);
- Dimensions: 114mm x 116mm x 48mm(H, W, D);
- More technical specs + installation instructions for Lutron LUTLBX / Lutron LUT-LBX-CE-WH(pdf file);
- Buy online the Lutron LUTLBX Synthetic Minimum Load For use with Reverse and Forward Phase Dimmers.
Lutron LUT-LBX-CE Synthetic Minimum Load For use with Reverse and Forward Phase Dimmers – Operation
The Lutron Integrated lighting controls for your home and coordinating the Lutron Accessories
Posted by sparksdirect in energy saving lights, light dimmers, lighting systems, new technologies, products pictures, switches and sockets, technical data, website update on May 20, 2010
After extensively introducing the Lutron Dimmers – the Lutron Lyneo range, the Lutron Rania range, and the Lutron Solina range – we have to admit that Lutron offers more than just single dimmers. You can actually control all the lights in one room or even in the whole house from just one button and control natural light with the Lutron motorised window solutions(see the Lutron Grafik Eye 3000 range and the Lutron Grafik QS ranges, including the Grafik QS multi-room control system). Lutron can also link the lighting controls to your security and AV systems. The possibilities are endless!
Coordinating the Lutron accessories and the Lutron wallplates
Lutron offers a comprehensive range of accessories to coordinate the finish and colour of power outlets, switches and jacks with your Lutron dimmers. Two Lutron products can also be framed together. There are many accessories available for Lyneo, Rania and Rania, like:
- Lutron Switches;
- Lutron Power outlet;
- Lutron Phone jacks;
- Lutron TV/SAT/CABLE;
- Lutron Dimmable transformers for low voltage lighting – 50W and 105W.
How to install a Lutron dimmer in four easy steps
- Turn power OFF at the breaker panel or fuse box. Disconnect the wires from the existing switch.
- Remove the clip cover and control plate from the switch mounting.
- Connect wires to the terminals of the dimmer.
- Mount the dimmer and the wallplate. Turn the Power ON at the beaker panel or fusebox.
To find out more about the Lutron Dimmers, we recommend the articles about the Lutron Wallbox Dimmers and the Lutron Grafik Eye range via the Articles on Switches & Sockets section. Buy online the Lutron Dimmers at the section called Lutron Dimming Solutions.
Lutron Table and Floor Lamp dimmers, the Lutron Solina Lamp Dimmers
Posted by sparksdirect in energy saving lights, light dimmers, products pictures, technical data, website update on May 19, 2010
Table lamps can add accents to a room’s lighting, providing a comfortable and convenient level of light next to your bedside. With the Lutron Solina lamp dimmers, you can dim a table or floor lamp to a soft glow during a movie or brighten it with a touch of a button for reading or working.
Read more about the Lutron Solina application designer dimmers for floor and table lamps, and an intro to the Lutron Solina range of lamp dimmers.
The Lutron Solina table and floor lamp dimmers – This discreet table-top dimmer lets you set the level of light for floor and table lamps. You don’t need to do any new wiring, it just plugs in.
Lutron Solina Table & Floor Lamp Dimmer – Features
- Plug-in lamp dimmer with 2 metre cord (plug included);
- For use with table and floor lamps that do not contain integral dimmers;
- LEDs indicate light level;
- Double-tap to full on;
- Memorises last light level set;
- Lights softly fade on and off;
- Max. Wattage: 300W.
Lutron Solina table lamp dimmers and floor lamp dimmers – finishes/specs
To purchase the Lutron Solina lamp dimmers(table lamp and floor lamp dimmer), visit the Lutron Dimmers section, and choose between the Lutron Solina Single Table And Floor Lamp White Dimmer and the Lutron Solina Single Table And Floor Lamp Mica Dimmer.
Intelligent dimmers with remote control, the Lutron Rania and Lutron Rania IR range
Posted by sparksdirect in all-time best-seller, energy saving lights, light dimmers, products pictures, switches and sockets, technical data, website update on May 18, 2010
The Lutron Rania Dimmers(the Rania and Rania IR range) are also mentioned on the blog at the Lutron Rania IR dimmers(a short guide to the product family of InfraRed Rania), the Lutron Rania digital dimmers and their accessories, how to choose a Lutron Rania digital dimmer, and the Lutron rania with remote control and the multi-location dimming. Remember: the Lutron Dimmers offer you the mood you desire with a better quality of light! In your living room, you can pre-set the lighting controls to suit the way that you live – “Cinema”, “Homework”, “Entertaining”, “Cleaning”. Then with a hand-held remote control (or even your universal TV remote), you can change the ambience of your room without even leaving your chair.
The Lutron Rania Dimmers
- Lights softly fade on and off;
- Ultra-quiet intelligent dimmer;
- LEDs indicate light level;
- Double-tap to full on;
- Dimmer memorises last level you chose;
- One dimmer to control your lights – up to 10 locations (when you have accessory dimmers);
- Single – 450W; Dual – 2 x 250W;
- Buy online the Lutron Rania Dimmers.
The Lutron Rania IR Dimmers
- Remote control – to change the light level at any time, from anywhere in the room;
- Dimmer has all the benefits of the Rania on the page opposite;
- Remote controls have a range of 10 metres (30 feet);
- Single – 450W; Dual – 2 x 250W;
- Buy online the Lutron Rania IR dimmers.
The Lutron Rania and Rania IR finishes
You can purchase online the Lutron Rania dimmers and the Lutron Rania IR dimmers(with their respective remote controls) – via the Lutron Wallbox Dimmers section.
Lutron Wallbox Slide dimmers, the Lutron Lyneo slide to off(STO) and Lyneo Preset
Posted by sparksdirect in ask Mr Sparks, energy saving lights, light dimmers, products pictures, technical data, website update on May 17, 2010
Dimmers make all the difference to the ambience of a room. Instead of old-fashioned on/off lighting, you can match the level of light to the mood or activity. Changing a switch to a dimmer is simple. With the Lutron dimming solutions you can choose from the new range of Lutron Lyneo slide dimmers in a range of different coloured finishes to match your décor.
Also mentioned via the article Introducing the Lutron Lyneo, Rania, and Solina ranges, the Lutron Lyneo range of slide dimmers has a status LED, can be installed like a switch, and the position of the slider – indicates the light level. Reduce / increase the lighting level in a particular venue / room by simply using the slider of the Lyneo Dimmer!
Lutron Lyneo Slide Dimmers – Models available
The Lutron Lyneo slide to off (sto)
- Slider to change light level;
- Single – 500W;
- Dual – 2 x 250W.
The Lutron Lyneo preset
- Slider to change light level;
- On/off button;
- LED status light;
- Also available without status light;
- Single – 500W; Dual – 2 x 250W.
The Lutron Lyneo range – Finishes
To purchase the Lutron Lyneo slide dimmers – visit the Wallbox dimmers from Lutron, or for any specific model + any quantity you would like to be quoted on, do not hesitate to contact us.