Illuma Conceal LED Striplights – Features

• High output LEDs >= 70lm/W;
• Neutral White version Ra80;
• Warm White version Ra95;
• Ideal for feature lighting in retail and leisure interiors and for incorporation into bespoke furniture;
• 300mm modules that can either connect end to end or make an arc using the Flexible connector;
• Clear and Frosted versions available;
• Diecast Aluminium heat sink for long LED life;
• Guaranteed for 5 years;
• Ease of installation: Easily fixed in position with two screws or double sided tape;
• Lamp description: High output LED available in Neutral White (NW) 6500K or Warm White (WW) 3200K.
• Illuma LED strip – Technical Data:
  - IP Rating: IP20 rated;
  - Weight: 0.09kg;
  - Input Voltage: 24V DC;
  - Dimming: Not Suitable for Dimming.

Materials used in the Illuma LED strips – Illuma Conceal

• Body: Extruded Aluminium;
• Lens: Injection Moulded Polycarbonate;
• Finish (Body): Anodized Aluminium(AL);
• Finish(End & Connectors): Grey(GY);
• Ends & Connectors: Injection Moulded PVC.

Illuma Conceal LED Striplights – Concealed LED Lighting – The System

This system of low voltage LED lights – striplights – is composed of the LED striplight, the transformer, and the available accessories. More specifically:

• Illuma LEDS304 – 6W White LED strip
  - Illuma LEDS304NW120(aluminium) -
  6W LED strip, Neutral White, Clear lens, weight 0.09kg;
  - Illuma LEDS304WW120(aluminium) -
  6W LED strip, Warm White, Clear lens, weight 0.09kg;
  - Illuma LEDS304NWFR(aluminium) -
  6W LED strip, Neutral White, Frosted lens, weight 0.09kg;
  - Illuma LEDS304WWFR(aluminium) -
  6W LED strip, Warm White, Frosted lens, weight 0.09kg;
• Illuma LEDPSU24 – transformer for the LED strips
  - Illuma LEDPSU24020 – 20W, 3 max. in-line units;
  - Illuma LEDPSU24100 – 100W, 16 max. in-line units;
• Illuma LED Accessories
  - Illuma LEDS38(3000) – Live end cable, 3000mm length(grey);
  - Illuma LEDS20 – Flexible connector(grey);
  - Illuma LEDS23 – End to end connector(grey);
  - Illuma LEDSDE – Dead-end(grey);

For straight runs: Direct connection for straight runs; for corners & curves: the flexible connectors are used.

Illuma Conceal – Applications of the LED striplights from Illuma

Buy online concealed lighting solutions – now from Illuma also – the Illuma Conceal striplights, IllumaLED light strips. Another concealed lighting system found on our website is the X-Flex Xenon lighting system.

The Marktrack 12V Track Lights is ideal for highlighting and general lighting in retail, commercial and domestic applications. Particularly, this range is suitable where flexibility is necessary in installations such as shops, art galleries and exhibitions, and where unobtrusive miniature spotlights are required. Read more below about the features and existing models / packs / lamps from the Illuma MarkTrack range.

Illuma MarkTrack 12V 25A – Low Voltage Track Lights – Features

• The Marktrack 12V range: Two lengths (1200mm and 2400mm); pendant kits. White & black only.
• High Quality: Robust track section prevents twisting when suspended. Fits flush to the ceiling.
• F marked: suitable for direct mounting on flammable surfaces. Guaranteed for five years.
• Supplied with twist-and-lock fixing plates.
• Live-end is pre-wired to 1.2m twin PVC cable (4.0mm²).
• Can be cut to the length required.
• Comprehensive instructions are included.
• Marktrack 12V track has a maximum loading of 300W and can be used with a wide range of miniature spotlights.
• It has a robust aluminium shroud which allows the track to be suspended.
• The Marktrack lights are ideal where a discreet track system is required.
• Materials:
  - Track: Extruded PVC with extruded aluminium shroud;
  - Finish: Powder Coated;
  - Conductors: Copper (2.5mm²);
  - Live-end & dead-end: Moulded Polycarbonate;
  - Finish: Self coloured;
  - Pre-wired Cable: PVC(4.0mm²);
• Technical Data
  - IP rating: IP20;
  - Input voltage: 240V;
  - Weight: 0.80kg;

Illuma MarkTrack – Miniature Spotlights Tracks – Existing models/packs

Illuma MarkTrack – 4′ and 8′ Tracks

• Illuma 4′ Marktrack – Illuma Marktrack TLV4A 12V 1200MM Track;
• Illuma 8′ MarkTrack – Illuma Marktrack TLV8 12V 2400MM Track;

All the Illuma MarkTracks are supplied complete with fixing kit, live-end and dead-end.

Above: Illuma Marktrack TLVD6/300 12V 1825MM Track C/W 250VA Dimmable Electronic Transformer And 4 Fittings – This Marktrack Pack comprises a length of shrouded track with an integral electronic transformer, and is supplied complete with twist-and-lock fixing plates, and 4 fittings. The robust track section can be cut to any length required. Marktrack Packs are as easy to install.

MarkTrack lamps – Illuma MarkTrack Spotlights

Left: Illuma Ministar Spotlight Marktrack MR16 12V Track Spot.
Right: Illuma Superstar Marktrack MR16 12V Track Spotlight.

Buy online Illuma MarkTrack fittings and packs.

Illuma Track Lights – Illuma Electrospot – general features

• Glare ring twists off for easy lamp change;
• Short circuit and thermal overload protection;
• Can be used with most types of dimmer, including leading & trailing edge;
• Ideal for both highlighting and general lighting in retail, commercial and domestic applications;
• Standard track version for Illuma 1-circuit track; surface mounting version;
• Other track versions can be made to order: for Concord, Global and Thorn 1-circuit track (order TH365X/G1 etc); for Global 3-circuit track (order TH365X/G3 etc);
• Surface-mounting version, pendants;
• Finishes available: White, black, or silver-grey finish;
• Attachments: barn-door and colour filters;
• The Illuma Electrospot Quality features:
  - Integral electronic transformer with soft-start maintains lamp life;
  - Short circuit and thermal overload protection;
  - F-marked: suitable for direct mounting on flammable surfaces;
  - Guaranteed for five years.

The Illuma Electrospot Installation – the ease

• Easy installation and removal from track.
• The adaptor locks the spotlight positively to the track and on standard version incorporates a switch for individual switching.
• Surface spotlights are pre-wired to a 10A terminal block.

The Electrospot Lamp Description

• High-intensity light output;
• Bright, white light;
• Precise beam control;
• Wide selection of wattages and beam angles;
• Energy saving and longer lamp life compared with standard incandescent lamps;
• Lamp type: MR16 12V(20W 350 lumens; 35W 600 lumens; 50W 950 lumens);
• Lamp life: 3000h;
• Lamp Holder GX5.3 / GU5.3.

More Technical Data about the ElectroSpot Track Lights

• Cut out diameter: 0mm;
• IP Rating: IP20;
• Weight: 0.28kg;
• Input Voltage: 240V;
• Transformer: Integral Electronic;
• Dimming: Built in individual dimmer control;
• Finishes available: WH (White), SG (Silver Grey), BL (Black).

The Materials used in Illuma ElectroSpot TrackLights

• The Body: Moulded, Glass-filled Polycarbonate;
• The Lampholder: Ceramic;
• The Stem: Moulded, Glass-filled Polycarbonate;
• The Finish: Powder-Coated.

The Electrospot Track Lights Versions available

• LED M/M MR4 – integral power supply c/w LEDs:
  - TLED3604NW014/S (8W Neutral White, LED 14º beam, 1-circuit track adaptor, 0.5kg),
  - TLED3604WW014/S (8W, Warm White LED, 14º beam, 1-circuit track adaptor, 0.50kg)
• MR16 12V – integral transformer -
  - TH365X/S (50W max, 1-circuit track adaptor, 0.30kg);
  - TH365X/SD/S (50W max, 1-circuit track adaptor, Self dim, 0.30kg);
  - TH465X (50W max, Surface mounting plate, 0.3kg)
• Attachments – TH75 – Barn Door
  ## All these models are available in 3 finishes: White, Sating Grey, or Black.

Don’t forget: you can purchase the Illuma Electrospot range at SparksDirect – Lights, Ceiling Lights, Surface Spots/Track Systems, Track Systems, Illuma Track Lights. Read more about the Illuma Track Lights via our Articles about Lights, more specifically about:

• Illuma Lumapar, discreet track spotlights(for mains tungsten halogen lamps);
• Illuma Electrostar, Lightweight spotlights(for mains 1-circuit track, track lights);
• Illuma Rocket, compact spotlights(for mains PAR halogen reflector lamps);
• The Project 95 range from Illuma(Interior downlight, shallow-depth classic);
• Illuma Proseal IP65 diecast aluminium downlights(ideal for wet environments);
• The Lumaseal range, IP65 semi-flush lights(Lighting solutions from Illuma);

Usage: Ideal for highlighting and general lighting in retail, commercial and domestic applications. Particularly suitable where the benefits of 12V lighting are required with the flexibility of a mains-voltage installation. The Illuma Electrostar is a stylish new 12V integral electronic transformer spotlight for 20W, 35W and 50W 50mm dichroic reflector lamps. Neat and compact in size, the Electrostar’s attractive, subtle styling will discreetly complement any interior. Read more about the Illuma Electrostar’s features, the lamp data & the materials used for this series of spotlights.

Illuma Electrostar – Lightweight Track Lights – Features

• The soft-start electronic transformer maintains MR16 12V lamp life.
• There is also short circuit and thermal overload protection.
• This range of spotlights – track lights – can be used with most types of dimmer, including leading & trailing edge.
• The Illuma Electrostar is a comprehensive range: Standard track version for Illuma 1-circuit track; surface mounting version. Other track versions can be made to order: for Concord, Global and Thorn 1-circuit track (order TH340X/G1); for Global 3-circuit track (order TH340X/G3).
• Integral electronic transformer with soft-start maintains lamp life.
• Short circuit and thermal overload protection.
• F-marked: suitable for direct mounting on flammable surfaces.
• Guaranteed for five years.
• Easy installation and removal from track.
• The adaptor locks the spotlight positively to the track and on standard version incorporates a switch for individual switching.
• Surface spotlights are pre-wired to a 10A terminal block.
• Finishes available: TH340XWH (White), TH340XSG (Silver Grey), TH340XBL (Black);

Lamp data, Technical features, and Materials Used – Illuma Electrostar Spotlights

• Lamp description:
  - High-intensity light output.
  - Bright, white light.
  - Precise beam control.
  - Wide selection of wattages and beam angles.
  - Energy saving and longer lamp life compared with standard incandescent lamps.
  - Lamp type: MR16, Low voltage lamp.
  - Lamp Holder GX5.3 / GU5.3.
  - Lamp life: 3.000h.
  - Wattage: 20W, 35W, or 50W lamps.
• Technical Data
  - Cut out diameter: 0mm.
  - IP Rating: IP20 rated.
  - Weight: 0.16kg.
  - Input Voltage: 240V.
  - Dimming: Suitable for dimming with standard dimmers, dimmable spotlight.
• Materials used
  - Body: Moulded, Glass-filled Polycarbonate.
  - Lampholder: Porcelain.
  - Transformer: Electronic.
  - Finish: Powder Coated.

On our website, you will find the TH340 series of Illuma ElectroStar, in all the finishes available: White Electrostar, Silver Gray Electrostar, and Black Electrostar – via Surface Spots, Track Systems, Illuma Track Lights. Similar Illuma Lights introduced on our blog, via the Articles about Lights, are:

• Illuma Rocket, compact spotlights for mains operated PAR halogen reflector lamps;
• Illuma Proseal IP65 diecast aluminium downlights, ideal for wet & humid environments;
• Interior downlight, shallow-depth classic, the Project 95 range from Illuma;
• Lighting solutions from Illuma: the Lumaseal range, IP65 semi-flush round lights;

Usage: This ceiling light is ideal for damp and humid environments, such as kitchens, bathrooms, showers and exterior soffits. The front glass pulls down easily for a quick lamp change. This range of downlights are either with a clear or with a frosted glass. Read more below about some of the features of this downlight, the lamp features, some technical data, and the materials used for the Illuma Proseal IP rated downlight – see available models.

Illuma Proseal IP65 Recessed Spotlights – Features

• Leaf-spring fixing for & easy installation.
• IP rating: IP65 rated; Front Glass is sealed to IP65 (jet-proof).
• Rating is valid from underneath only.
• Materials: Bezel in Diecast aluminium, Housing in Steel.
• Finish: WH(White), CH(Chrome), BN (Brushed Nickel).
• Lamp Type: PAR16, MR16.
• Lamp Holder
  - PAR16: GU10.
  - MR16: GX5.3 / GU5.3.
• Wiring connector box in accordance with BS EN 60598 enables compliance with IEE Wiring Regulations.

Illuma Proseal range – Lamp features

• High-intensity light output.
• Bright, white light.
• Precise beam control.
• Lamp life: 3.000 h.
• Wattage: 20W, 35W, or 50W.
• Lamp cap: MR16 or PAR16.
• Wide selection of wattages and beam angles.
• Energy saving and longer lamp life compared with standard incandescent lamps.

Illuma Proseal miniature downlights – Technical Data

• Cut out diameter: 72mm.
• IP Rating: IP65.
• Weight: 0.30kg.
• Input Voltage: 12V(the MR16, transformer required) or Mains voltage(the PAR16).
• Dimming: Suitable for Dimming if used with a Dimmable transformer and inductive dimmer, dimmable spotlights.
• Buy online this dimmable ceiling spotlight via Sparksdirect.

Materials used in the Illuma Proseal range of downlights

• The Housing: Steel.
• The Body and the Rim: Zinc Alloy Diecast.
• The Upstand: Zinc-Plated Steel.
• The Glass: Toughened Float Glass.
• The Connector Box: Polycarbonate.
• The Lampholder: Ceramic.
• The Wiring: PTFE coated.
• The Fixing Springs: Zinc-Plated, Tempered-Spring Steel.

Illuma Proseal – available models

• PAR16 Mains – in white, chrome, or brushed nickel; 50W, in frosted glass or clear glass.
• MR16 12V – in white, chrome, or brushed nickel; 50W, in frosted glass or clear glass.

Buy online the Illuma Proseal range(or request a quote from us, if the desired models are not on our website), and read also more about the Illuma Project 95 range and the Illuma Lumaseal range.

The Illuma Project 95 is a very comprehensive range: Open, gimbal, eyeball, pinhole, wallwash, baffle (two sizes), and white, silver cone versions; open version also available with Disc Glass. On our website you will find the D225XWH(white, gimball, MR16) – but the rest can be requested on order.

Illuma Project 95 – Classic Flexible Downlights, Recessed Lights – Features

• The Quality: Highly-tooled, diecast centres. Adjustment of the lamp angle is possible on most fittings; eyeball and wallwash versions can also be rotated through 355. High temperature ceramic lampholder and PTFE-coated leads. Guaranteed for five years.
• Installation: Wiring connector box in accordance with BS EN 60598 enables compliance with IEE Wiring Regulations.
• Lamp features:
  - High-intensity light output.
  - Bright, white light.
  - Precise beam control.
  - Wide selection of wattages and beam angles.
  - Energy saving and longer lamp life compared with standard incandescent lamps.
• Technical Data
  - Cut out diameter: 80mm
  - IP Rating: IP20
  - Weight: 0.19kg
  - Input Voltage: 12V
• Dimming: Suitable for dimming if used with dimmable transformer and inductive dimmer
• Materials:
  - Bezel Rim: Alloy
  - Upstand: Zinc-Plated, Pressed Steel
  - Connector Box: Polycarbonate
  - Lampholder: Ceramic
  - Wiring: PTFE coated
  - Fixing springs: Zinc-plated, tempered-spring, Steel
  - Finish: Powder-coated, except polished brass/chrome, polished and electroplated
• Gimbal ±30º pivot.
• Leaf-spring fixing for quick and easy installation.
• Simple spring-loaded lamp change.
• Lamp used:
  - PAR16 Mains - the D1025(gimbal) / D1051(pinhole) / D1020(black baffle) series
  - MR16 12V – the D225X(gimbal) / D251X(pinhole) / D120X(black baffle) series
• Finishes: WH (White); SG (Silver Grey); BL (Black); CH (Chrome); BN (Brushed Nickel);
• Lamp Holder: PAR16 – GU10; MR16 – GX5.3 / GU5.3;
• Lamp life: 3000h.
• Wiring: Connector box in accordance with BS EN 60598.
• Buy lamps from this range – Illuma Project 95 downlights – online via SparksDirect.

Buy online this range of Ceiling Downlights – Illuma Project 95 series – Flexible Downlights. More about the Illuma lights – Illuma LumaSeal range.

Switched wall light fitting – the Palermo 600 modern wall light has a fitted pull cord switch for convenience(note: the unswitched version is also available, Palermo 900). This light uses a low energy fluorescent light bulb, T5 14W, which is included – low energy over mirror light.

Read more about the features and the dimensions of this modern bathroom wall mounted light fitting – part of the Lights, Bathroom Lights, Bathroom Wall Lights, even Bathroom Mirror Lights.

Palermo 600 Over Mirror Light for Bathrooms – Features

• Modern Striplight for bathrooms – wall light or over mirror light.
• Part of the Palermo range of modern bathroom lights.
• Lamp used: 1 x T5 14W(lamp included) – low energy light fitting.
• Dimmable: this over mirror light is not dimmable(do not use a dimmer switch); non-dimmable.
• IP rating: IP44 (can be used in bathroom zones 2 and 3).
• Dimensions: Width 40mm Length 600mm Depth 60mm.
• This light fitting can be mounted on a normally flammable surfaces(F Marked).
• Class 2 rated: double insulated wall light(does not require to be earthed).
• Style: modern wall light / over mirror striplight.
• Switched: Includes integral pull cord switch, fitted switch.
• This is the Switched version of this luminaire(above mirror light) – the un-switched version also available.
• Includes integral electronic ballast.
• Model: AX0346, 0460 Palermo 600 switched.
• Finish: polished chrome base, shiny chrome.
• Weight: 1.6kg.
• More technical specs – download the Palermo 600 manual(pdf).
• Available: this light fitting is in stock, available for next-day delivery.
• Buy online the Palermo Wall Light – Palermo 600, at the best price! Or check out Palermo 900, the unswitched version.

Bathroom Wall Light – 0460 Palermo 600 – Wall Mounted Strip Light – Dimensions

This is what you get when you purchase Palermo 600 wall light:

• IP44 rated over-mirror striplight;
• Low energy wall light for bathrooms;
• Light with Integral fitted pull cord switch;
• Modern warm white mains halogen light;
• Polished chrome base – classy and stylish finish;
• Double insulated wall light, fully earthed;
• Wall Light and Over-Mirror Light;
• Includes integral electronic ballast;
• High quality design with a modern touch;
• Fluorescent strip light in polished chrome;
• Mountable on normally flammable surfaces;
• Weighing only 1.6kg – light bathroom wall lamp;
• Next-day delivery – light fitting in stock.

This is how your bathroom can look like when you install this over-mirror bathroom light fitting:

Similar wall lights for a modern bathroom:

• Bathroom lights, over mirror bathroom light, Tallin 300 and Tallin 600;
• Livorno cabinet wall light, excellent choice for bathroom mirror light;
• Cabaret wall light, polished chrome finish – old fashioned bathroom wall light;
• Madison Bathroom Wall Light with magnifying mirror & pull cord switch;
• RGB colour changing strip lights, flexible LED striplights from Aurora;
• X-Flex Xenon Lights – how it works, installation, advice;

Low voltage bathroom ceiling light – uses a 50vA 12V transformer(not included). Read more about the features of the Ice Shower Downlight range, view the schematic representation of their dimensions, and also their positioning in the ceiling.

Ice Bathroom Ceiling Lights – Shower Light – Features

• Supply: low voltage ceiling light, requires a 50VA 12V transformer(not included).
• Design: modern design with iced glass and polished chrome.
• Usage: can be used in the shower, bathrooms, and all other rooms in the house.
• Finish: Polish Chrome base and round/square ice glass.
• Lamp used: 1 x 50W GX5.3, lamp not included(low voltage halogen bulb).
• IP rating: IP65(suitable for bathroom zones 1, 2, 3).
• Dimensions:
  - AX5512 (square downlight): depth 11mm, width&length 100mm;
  - AX5511(round downlight): depth 11mm, diameter 105mm;
• Cutout required: 70mm.
• Switched: No on-off switch or pull cord.
• Weight:
  - AX5512 (square shower light): 0.7kg;
  - AX5511 (round shower light): 0.6kg;
• Dimmable: this Ice Bathroom Downlight is dimmable, can be used with a regular dimmer switch.
• This low voltage light fitting is also fire resistant.
• Class 3 rated.
• Can be used in the shower and under the direct splashing of water.
• This range is suitable for mounting only on non-flammable surfaces.
• Availability: both these models are available for ordering and shipping immediately.
• Models:
  - Ice Square Shower/Bathroom Downlight (AX5512). More info: download the PDF manual file;
  - Ice Round Shower/Bathroom Downlight (AX5511). More info: download the PDF manual file;
• Buy online the Ice Round/Square Recessed Lights for domestic use – at the best price – via Sparksdirect(Lights, Bathroom Lights, Bathroom Ceiling Lights)

Ice Downlights for Bathrooms – Ice Shower Lights – Dimensions

Ice Round Downlight, bathroom round recessed light(AX5511) – Dimensions

Ice Square Downlight, recessed bathroom light(AX5512) – dimensions

Ice Shower Downlights – Round or Square Glass Shower Ceiling Lights – Positioning

Other similar bathroom ceiling light fittings introduced on our blog are:

• The Garda Round or Square Downlight – Glass Ceiling Light for bathrooms;
• Osaka bathroom light – ceiling light fixture, downlighter;
• Mariner Ceiling light – flush bathroom ceiling lights;
• Polished chrome round flush ceiling light for bathrooms, Denia AX0587;
• recessed downlight in white or satin chrome finish, adjustable recessed spotlight;
• Adjustable low voltage halogen downlight, Taro AX5574, round recessed light;

Taro Adjustable Downlight – AX5574 – specs

This low voltage downlight is a simple recessed light in brushed aluminium finish, with the possibility of adjusting the light beam(adjustable).

• Recessed ceiling light – adjustable / tiltable ceiling light;
• Uses a low voltage halogen lamp – low voltage downlight;
• Brushed aluminium trim around the downlight;
• Dimmable: this light fitting can be used with a dimmer switch(it is possible to dim this light);
• Dimensions: height 85mm, diameter 92mm, cutout 70mm;
• This Luminaire is not suitable for mounting on non-flammable surfaces;
• IP Rating: IP20(can be used in bathroom zone 3, outside of the reach of water)
• Lamp used: 1 x 50 W GX5.3 MR16 halogen lamp(low voltage); lamp not included(buy lamp online);
• This adjustable low voltage spotlight uses a transformer – not included(buy transformer online);
• The Taro Adjustable Downlight requires a cut out of 70mm;
• Class 3 rated recessed light;
• Weight: 1kg;
• Buy online the Taro Spotlight – adjustable downlight.

Taro Adjustable Low Voltage Ceiling Light – AX5574 – Dimensions

Buy online the Taro Adjustable Ceiling SpotLight, or view other recessed ceiling lights(the Balun Pendant, Thorn Batten Luminaires, Aquaforce II from Thorn, Illuma Tracklights, Recessed Spotlights, etc).

Low Voltage Downlight – features

• This light fitting is MR16 low voltage halogen wallwash downlighter.
• Pressed, tiltable, different colours available.
• Low voltage gimbal with retaining ring and 30 degree variable angle.
• Diameter: 105mm(external). Height: 116mm (external).
• Low voltage tilt downlight and saddle bar.
• Lamp type: MR16 halogen lamp; lamp not included(buy lamp online).
• Wattage: max. 50W. Voltage: low voltage, 12V. Lamp: GX5.3, MR16.
• Weight: approx. 1.25kg.
• RoHS compliant recessed light fitting.
• This recessed light fitting requires a transformer(buy transformer online).
• Available finishes: white low voltage gimbal(LVGIM50W) and chrome low voltage gimbal (LVGIM50C).
• Purchase online the adjustable low voltage downlight, or view more details about it on its dedicated page at lightsok.co.uk.

Low Voltage Recessed Gimbal Downlight – available finishes

If you are looking for something slightly different as both finish and size, check out the Satin Chrome Stud Fixed downlight, the Steel Adjustable Recessed Spotlight, the polished brass fixed recessed eyeball, or the Coloured Glass Fixed Recessed Downlight – or the other bargains and hot deals at LightsOK.