Illuma Concepta Spotlights in action – application in a church

Illuma Concepta Spot Lights in small or large shops – Display Lighting with Concepta Spotlights

As you can see from these pictures, features that seem un-important or even un-discoverable in normal conditions are being highlighted and emphasized by using these robust spotlights, the Illuma Concepta Track Spotlights or Surface Mounted Spots! They can be used either in small venues(small shops with small display lighting needs) or in large areas(the churches, restaurants, meeting halls, large venues, etc – with great lighting needs) – you name it! We may come back to the Illuma Concepta Spotlights applications later, but if you want to purchase them, check out the Illuma Track Systems & the Concepta Track Spot Lights.

Applications of the Illuma Electrospot Track Spot Lights in Museums

Applications of the Illuma Electrostar Track Spotlights in Art Galleries

If you want to see more applications of the Illuma Lights – check out the Illuma Conceal and Illuma Concepta pictures. Buy online Illuma Electrostar Spotlights and Illuma Electrospot Track Spotlights – at Illuma Track Lights and Spotlights.

Illuma Conceal Application in a Sushi Bar

Illuma Conceal Application in Hotel Rooms – Concealed LED Lights

IllumaLED Conceal LED StripLights Application – in Shops

Illuma Concepta application in shops and display lighting

Soon, we will post more of these modern applications of the Illuma lights – until then, you can buy online Illuma Conceal and Illuma Concepta – via Lights at SparksDirect.co.uk.

The Illuma Track12 is a miniature 20A track system which is ideal for where space is tight or neatness is paramount. The sections of this track system are supplied with pre-drilled fixing holes & come complete with live-end/connector & dead-end. The Track12 range of track light fittings are ideal for linear strip lighting or display lighting in retail, commercial and domestic applications. More features of the Track12 range:

• Comprehensive range: This range takes Floodlights and spotlights, white or black finish (all).
• F-marked: suitable for direct mounting on flammable surfaces. Guaranteed for five years (except lamps).
• Track lengths are supplied with pre-drilled fixing holes and with a live-end/connector and dead-end: no additional connectors are needed for straight runs.
• Can be cut to the length required. Comprehensive instructions are included.
• The materials this fitting is made of is Extruded Polycarbonate & ABS mix.
• A laminated transformer is available up to 300VA, but the track must not be loaded beyond 240W.

The Illuma Track12 Lamp Description

• Crisp, white light.
• Excellent colour rendering.
• Output blends well with light from 12V tungsten halogen lamps.
• Long life reduces maintenance costs.
• Energy-efficient: up to 8 times the lumens per watt of a GLS lamp.

The Illuma Track12 Technical data

• IP Rating: IP20.
• Weight: 0.20kgs.
• Input Voltage: 12V.
• Dimming: Suitable for Dimming.

The Illuma Track12 – Track Lights – is Composed of

Left: Illuma Live-End for the Illuma Track12 Track(buy online).
Right: Illuma Track12 TL4 12V 1134MM Track (buy online).

Left: Illuma Track12 Corner.
Right: Illuma Track12 Adjustable.

Buy online the Illuma Track12 lights – for small spaces. More about the Illuma Track Systems:

The Illuma Track lighting systems are probably the most versatile lighting tool for galleries, exhibitions, retail and other display applications, allowing fixtures to be positioned precisely where required. The track systems can be mounted directly onto ceilings or walls, or they can be suspended from ceilings in higher spaces and miniature track systems can be located inside shelves or display cases.

The Illuma track systems come in two types – the low voltage track systems(with a remote transformer), or the mains voltage track systems(with one or three circuits; most of the TrackLights ranges we introduced until now – the Highspot range,  the Concepta range,  the Topspot range, the Electrospot range, the Lumapar range, the Electrostar range, the Rocket range, the Project 95 range, the Proseal range, or the Lumaseal range – are 1-circuit/3-circuit mains voltage track lights). While the principal use of track systems is for accent lighting, they can also be used for linear fluorescent wallwashers or floodlights for lighting large areas. An extension to the 3-circuit track is the new ‘Grid’ product, which allows greater flexibility for accent lighting. It is mounted between suspended 3-circuit track configurations and has its own range of spotlights. What you just read about is some vital information about the Illuma Track12 12V miniature track systems – Ideal for display cupboards(cupboard track lights) – like jewelry shops, figurines, fashion clothes, etc.

Read more below about some of the general features of the Highspot range, the lamp description, some technical data, and the materials used in the Highspot range.

Illuma Highspot – floodlights – general features

• Supplied with toughened safety glass;
• High-efficiency, super-pure aluminium reflector;
• Compact design;
• Highspot Floodlight CDM-TD with 1-Circuit Track Adaptor;
• Single-ended and double-ended lamps; 35W, 70W or 150W;
• Standard version for use with Illuma 1-circuit track;
• Surface-mounting versions; white, black or silver-grey finish;
• Other track versions can be made to order: for use with certain types of Concord, Global and Thorn 1-circuit track (order THQE3070/G1 etc); for use with Global 3-circuit track (order THQE3070/G3 etc);
• Attachments: louvre, cowl and barndoor;
• Single-ended version can be made to order for miniature white SON lamp (SDW-TG);
• Fully adjustable: body rotates 355°, lighting head tilts 90°;
• The integral electronic gear provides constant power, shuts off faulty lamps to eliminate pulsing and protect the gear, gives flicker-free lighting, improved colour maintenance and virtually silent;
• Easy installation and removal from track. The adaptor locks the spotlight positively to the track, and on the standard version incorporates a switch for individual switching;
• These surface spotlights are pre-wired to a 10A terminal block;
• The integral control gear simplifies wiring and installation;
• The safety glass can be easily removed for lamp change;
• Comprehensive instructions inside.
• Buy online the Illuma Highspot THQE315W – the white finished version of the Highspot range.

The Highspot Lamp Description – Illuma Floodlight

• Crisp, white light.
• Excellent colour rendering.
• Output blends well with light from 12V tungsten halogen lamps.
• Long life reduces maintenance costs.
• Energy-efficient: up to 8 times the lumens per watt of a GLS lamp.
• Lamp type: CDM-TD.
• Cap type:
  - Rx7s(70W, 0.25 lamp current, 6300 lumens, 12000h lamp life) or
  - Rx7s-24(150W, 0.5 lamp current, 13000 lamp lumens, 12000h lamp life).

The Illuma Highspot technical data

• Cut out diameter: 0mm;
• IP Rating: IP20(used indoors, outside of the reach of water);
• Weight: 2.28kg;
• Input Voltage: 240V, mains voltage;
• Dimming: Not Suitable for Dimming.

The Illuma Highspot Materials

• Body: Aluminium, extruded body diecast heat sink;
• Yoke: Mild Steel;
• Lampholder: Ceramic;
• Reflector: Super-Pure Aluminium;
• Control Gear: Electronic.

To purchase online these Illuma Highspot flood light fittings, visit the Track Systems, Track Lights, Iluma Track Systems. Other ranges from Illuma introduced on our blog are the Concepta range, the Topspot range, the Electrospot range, the Lumapar range, the Electrostar range, the Rocket range, the Project 95 range, the Proseal range, or the Lumaseal range.

Illuma Topspot Track Lights – Features

• This range is a versatile range of spotlights;
• The Topspot Style: Contemporary styling;
• Available with a range of mounting options – see the TopSpot T410 range;
• Part of a versatile range of highly-tooled spotlights designed to accommodate reflector, PAR halogen and GLS lamps;
• Usage: Ideal for both highlighting and general lighting in retail, commercial and domestic applications;
• Lamps: Accepts a variety of lamps and wattages;
• Standard track version for Illuma 1-circuit track; surface-mounting version; trackpacks and pendants. White finish. Other track versions can be made to order: for use with certain types of Concord, Global and Thorn 1-circuit track (order T310/G1); for use with Global 3-circuit track (order T310/G3);
• Attachments available to conceal a reflector lamp or allow the use of GLS lamps;
• Guaranteed for five years;
• Buy online the Illuma Topspot range – surface mounted(T410) or Track Light(T310).

About Installing the Illuma Topspot range – easy

• Easy installation and removal from track.
• The adaptor locks the spotlight positively to the track, and on the standard version incorporates a switch for individual switching.
• Surface spotlights are pre-wired to a 10A terminal block.

Illuma Topspot Lamp details

• The lamp has a High-intensity light output;
• Lamp cap: E27;
• Lamp Types: R63 60W / R80 75W / PAR20 50W 25° / R63 60W / R80 75W / PAR20 50W / PAR30 100W / PAR30 100W;
• Lamp life: 1000h;
• Input voltage: 240V.

The Topspot range from Illuma – Technical Data

• Cut out diameter: 0mm;
• IP Rating: IP20;
• Weight: 0.21kg;
• Input Voltage 240V;
• Dimming: Suitable for Dimming(dimmable spotlights).

Materials used in Illuma Topspot Track Lights

• Body & Stem: Injection-moulded PBT;
• Gasket: Silicone Rubber;
• Lampholder: Ceramic;
• Track Adaptor: Moulded Polycarbonate;
• Finish: Self coloured.

You can purchase online the Illuma Topspot range:

• The track-mounted Topspot – the track light version, Topspot T310;
• The surface mounted Topspot – the surface spotlight version, Topspot T410;

Similar tracklights to the Illuma Topspot, introduced on our blog, are:

• Illuma Electrospot, track lights for highlighting and general lighting;
• Illuma Lumapar, discreet track spotlights for mains tungsten lamps;
• Illuma Electrostar, Lightweight spotlights for mains 1-circuit track;
• Illuma Rocket, compact spotlights for mains PAR reflector lamps;

Illuma Track Lights – Illuma Electrospot – general features

• Glare ring twists off for easy lamp change;
• Short circuit and thermal overload protection;
• Can be used with most types of dimmer, including leading & trailing edge;
• Ideal for both highlighting and general lighting in retail, commercial and domestic applications;
• Standard track version for Illuma 1-circuit track; surface mounting version;
• Other track versions can be made to order: for Concord, Global and Thorn 1-circuit track (order TH365X/G1 etc); for Global 3-circuit track (order TH365X/G3 etc);
• Surface-mounting version, pendants;
• Finishes available: White, black, or silver-grey finish;
• Attachments: barn-door and colour filters;
• The Illuma Electrospot Quality features:
  - Integral electronic transformer with soft-start maintains lamp life;
  - Short circuit and thermal overload protection;
  - F-marked: suitable for direct mounting on flammable surfaces;
  - Guaranteed for five years.

The Illuma Electrospot Installation – the ease

• Easy installation and removal from track.
• The adaptor locks the spotlight positively to the track and on standard version incorporates a switch for individual switching.
• Surface spotlights are pre-wired to a 10A terminal block.

The Electrospot Lamp Description

• High-intensity light output;
• Bright, white light;
• Precise beam control;
• Wide selection of wattages and beam angles;
• Energy saving and longer lamp life compared with standard incandescent lamps;
• Lamp type: MR16 12V(20W 350 lumens; 35W 600 lumens; 50W 950 lumens);
• Lamp life: 3000h;
• Lamp Holder GX5.3 / GU5.3.

More Technical Data about the ElectroSpot Track Lights

• Cut out diameter: 0mm;
• IP Rating: IP20;
• Weight: 0.28kg;
• Input Voltage: 240V;
• Transformer: Integral Electronic;
• Dimming: Built in individual dimmer control;
• Finishes available: WH (White), SG (Silver Grey), BL (Black).

The Materials used in Illuma ElectroSpot TrackLights

• The Body: Moulded, Glass-filled Polycarbonate;
• The Lampholder: Ceramic;
• The Stem: Moulded, Glass-filled Polycarbonate;
• The Finish: Powder-Coated.

The Electrospot Track Lights Versions available

• LED M/M MR4 – integral power supply c/w LEDs:
  - TLED3604NW014/S (8W Neutral White, LED 14º beam, 1-circuit track adaptor, 0.5kg),
  - TLED3604WW014/S (8W, Warm White LED, 14º beam, 1-circuit track adaptor, 0.50kg)
• MR16 12V – integral transformer -
  - TH365X/S (50W max, 1-circuit track adaptor, 0.30kg);
  - TH365X/SD/S (50W max, 1-circuit track adaptor, Self dim, 0.30kg);
  - TH465X (50W max, Surface mounting plate, 0.3kg)
• Attachments – TH75 – Barn Door
  ## All these models are available in 3 finishes: White, Sating Grey, or Black.

Don’t forget: you can purchase the Illuma Electrospot range at SparksDirect – Lights, Ceiling Lights, Surface Spots/Track Systems, Track Systems, Illuma Track Lights. Read more about the Illuma Track Lights via our Articles about Lights, more specifically about:

• Illuma Lumapar, discreet track spotlights(for mains tungsten halogen lamps);
• Illuma Electrostar, Lightweight spotlights(for mains 1-circuit track, track lights);
• Illuma Rocket, compact spotlights(for mains PAR halogen reflector lamps);
• The Project 95 range from Illuma(Interior downlight, shallow-depth classic);
• Illuma Proseal IP65 diecast aluminium downlights(ideal for wet environments);
• The Lumaseal range, IP65 semi-flush lights(Lighting solutions from Illuma);

The Illuma Lumapar range has twelve styles in white, black or silver-grey (all) or chrome finish (TM3210/S, TM3220/S, TM3410/S and TM3420/S only); the standard track versions are for use with Illuma 1-circuit track; all can be also used as surface-mounting versions. Read more below about some of the features of the Lumapar range, the lamp details, technical data, and the materials used for this range.

Illuma Track Spotlights – Illuma Lumapar, Features

• F-marked: suitable for direct mounting on flammable surfaces.
• Guaranteed for five years.
• Easy installation and removal from track. The adaptor locks the spotlight positively to the track, and on standard versions incorporates a switch for individual switching.
• These surface spotlights are pre-wired to a 10A terminal block.
• Other track versions can be made to order: for use with certain types of Concord, Global and Thorn 1-circuit track (order T3220/G1 etc); for use with Global 3-circuit track (order T3220/G3 etc).
• Antiglare ring and barn-door for use with TM3210/S and TM3410/S.
• Two track-packs supplied c/w 50W PAR 16 lamps; white finish.

Illuma Lumapar Track Spotlights – Lamp Details

• Dimmable: Easy to dim with standard mains dimmer.
• Bright, white light.
• Excellent colour rendering.
• High-intensity light output.
• Two back housing styles – Flat-Back and Ellipse.
• Four front body styles.
• Materials: Body and Housing in Diecast aluminium.
• Finishes avaiable: WH (White), SG (Silver Grey), BL (Black), CH (Chrome).
• Lamp Type: PAR16 / GU10, PAR20 PAR30.
• Lamp Holder PAR16: GU10 PAR20 / PAR30: E27.
• Lamp life: 2.000h.
• Lamp Current: 0.2.
• Wattage: 50W max.
• On our website, you can find:
  - the TM3410 range (Illuma LumaPAR Ellipse Spotlight PAR16 / GU10 Mains Track Spot);
  - the TM3210 range (Illuma LumaPAR Flat-Back Spotlight PAR16 / GU10 Mains Track Spot);
  - the T3420 range (Illuma Lumapar PAR20 Ellipse Track Spot);
  - the T3225 range (Illuma LumaPAR Flat-Back Spotlight PAR30 Track Spot);
  - the T3425 range (Illuma PAR30 Lumapar Ellipse track spot).

Illuma Lumapar Track Lights – Technical Data

• Cut out diameter: 0mm.
• IP Rating: IP20.
• Weight: 0.14kg.
• Input Voltage: 240V.
• Dimming: Suitable for Dimming.

The Materials used for the Lumapar Track Spot Lights

• Body: Diecast Aluminium.
• Stem: Diecast Aluminium.
• Lampholder: Ceramic.
• Wiring: PTFE coated.
• Finish: Powder Coated.

Buy online Lumapar spotlights from Illuma via SparksDirect(TM3410WH, TM3210WH, T3420WH, T3225WH, T3425WH), and read more about the Iluma Light Fittings on our website via Articles about Lights.

Usage: Ideal for highlighting and general lighting in retail, commercial and domestic applications. Particularly suitable where the benefits of 12V lighting are required with the flexibility of a mains-voltage installation. The Illuma Electrostar is a stylish new 12V integral electronic transformer spotlight for 20W, 35W and 50W 50mm dichroic reflector lamps. Neat and compact in size, the Electrostar’s attractive, subtle styling will discreetly complement any interior. Read more about the Illuma Electrostar’s features, the lamp data & the materials used for this series of spotlights.

Illuma Electrostar – Lightweight Track Lights – Features

• The soft-start electronic transformer maintains MR16 12V lamp life.
• There is also short circuit and thermal overload protection.
• This range of spotlights – track lights – can be used with most types of dimmer, including leading & trailing edge.
• The Illuma Electrostar is a comprehensive range: Standard track version for Illuma 1-circuit track; surface mounting version. Other track versions can be made to order: for Concord, Global and Thorn 1-circuit track (order TH340X/G1); for Global 3-circuit track (order TH340X/G3).
• Integral electronic transformer with soft-start maintains lamp life.
• Short circuit and thermal overload protection.
• F-marked: suitable for direct mounting on flammable surfaces.
• Guaranteed for five years.
• Easy installation and removal from track.
• The adaptor locks the spotlight positively to the track and on standard version incorporates a switch for individual switching.
• Surface spotlights are pre-wired to a 10A terminal block.
• Finishes available: TH340XWH (White), TH340XSG (Silver Grey), TH340XBL (Black);

Lamp data, Technical features, and Materials Used – Illuma Electrostar Spotlights

• Lamp description:
  - High-intensity light output.
  - Bright, white light.
  - Precise beam control.
  - Wide selection of wattages and beam angles.
  - Energy saving and longer lamp life compared with standard incandescent lamps.
  - Lamp type: MR16, Low voltage lamp.
  - Lamp Holder GX5.3 / GU5.3.
  - Lamp life: 3.000h.
  - Wattage: 20W, 35W, or 50W lamps.
• Technical Data
  - Cut out diameter: 0mm.
  - IP Rating: IP20 rated.
  - Weight: 0.16kg.
  - Input Voltage: 240V.
  - Dimming: Suitable for dimming with standard dimmers, dimmable spotlight.
• Materials used
  - Body: Moulded, Glass-filled Polycarbonate.
  - Lampholder: Porcelain.
  - Transformer: Electronic.
  - Finish: Powder Coated.

On our website, you will find the TH340 series of Illuma ElectroStar, in all the finishes available: White Electrostar, Silver Gray Electrostar, and Black Electrostar – via Surface Spots, Track Systems, Illuma Track Lights. Similar Illuma Lights introduced on our blog, via the Articles about Lights, are:

• Illuma Rocket, compact spotlights for mains operated PAR halogen reflector lamps;
• Illuma Proseal IP65 diecast aluminium downlights, ideal for wet & humid environments;
• Interior downlight, shallow-depth classic, the Project 95 range from Illuma;
• Lighting solutions from Illuma: the Lumaseal range, IP65 semi-flush round lights;

Read more about the general features of this range of Illuma Rocket Track Lights, some technical data, the materials used for its construction, and the available models (T325WH, T326WH, T327WH and T328WH)- buy online the Illuma Rocket Spotlights via Sparksdirect – the best price online!

Illuma Rocket Spot Lights – 1-circuit track lights – Features

• The cone versions conceal the lamp and reduce the glare.
• Accepts a variety of lamp type and wattages.
• Operate directly off the mains supply without the need for a transformer.
• Superior beam control through lamp selection.
• Rocket Spotlight with Cone, PAR20 1-Circuit Track Adaptor.
• The Rocket range of stem spotlights accommodates PAR halogen lamps, as well as R60/R63 and R80 reflector lamps.
• The PAR halogen lamps provide a similar quality of light and sparkle to low-voltage lamps but operate directly off the mains supply without the need of a transformer.
• Standard track version for Illuma 1-circuit track; surface mounting version.
• Other track versions can be made to order: for use with certain types of Concord, Global and Thorn 1-circuit track (order T325/G1 etc); for Global 3-circuit track (order T325/G3 etc). White, black or silver-grey finish.
• F-marked: suitable for direct mounting on flammable surfaces. Guaranteed for five years.
• Easy installation and removal from track.
• The adaptor locks the spotlight positively to the track.
• Surface spotlights are pre-wired to a 10A terminal block.
• Comprehensive instructions.
• High-intensity light output lamp.

Illuma Rocket Spotlights – Technical Data

• Cut out diameter: 0 mm.
• IP Rating: IP20.
• Weight: 0.24kg.
• Input Voltage: 240V.
• Dimming: Suitable for use with standard dimmers, dimmable  track lights.
• More technical data:
  - Illuma Rocket Spotlight PAR30 Mains Track Spot – Illuma T325 and Illuma T328, download the pdf file;
  - Illuma Rocket Spotlight R80/PAR20 Mains – Illuma T326 and Illuma T327, download the pdf file;

Rocket Track Lights from Illuma – Materials Body and Housing

• T328 / T327: Aluminium / polycarbonate.
• T325 / T326: Steel / polycarbonate.
• Finish: WH (White), SG (Silver Grey), BL (Black).
• Lampholder: Ceramic.
• Track Adaptor: Moulded Polycarbonate.
• Finish: Powder Coated.
• Lamp Type: PAR30 R60 / R63 R80 PAR20.
• Lamp Holder: E27.

Illuma Rocket TrackLights – Models available

• PAR30 Mains (with no transformer required): T325(rocket, 100W max, 1-circuit track adaptor, 0.2kg); T328(100W max, rocket spotlight with cone, 1-circuit adaptor, 0.3kg);
• Mains(with no transformer required): T326(rocket available with R60 / R63 / R80 and PAR20; 1-circuit track adaptor, 0.3kg), T327(available with R60 / R63 / PAR20; rocket spotlight with cone, 1-circuit track adaptor, 0.2kg)

Other articles about the Illuma Lights – via our Articles about Lights page:

• Lighting solutions from Illuma: the Lumaseal range, IP65 semi-flush round lights;
• Interior downlight, shallow-depth classic, the Project 95 range from Illuma, PAR16 and MR16;
• Illuma Proseal IP65 diecast aluminium downlights, ideal for wet and humid environments;