Blog Sparks Direct
Posts Tagged heating systems
the cheapest convector heater with wall mounting option: cheap and easy to install!
Posted by sparksdirect in all-time best-seller, customer service, guest expert, heaters, in-house announcements, promotions, technical data on December 15, 2011
We do not have snow outside yet, but it is getting pretty cold outside and rumors of snow falling are beginning to show as being true even as far as London… No matter how much you may like the cold weather, I am sure that when you come inside, whether at home or in the office, you want it to be nice and warm!
By using the SCAN 2kW convector heater you can have an easy way to heat up the room or the office – at the same time spending less for the heating solution! The SCAN heater is the cheapest available convector heater you can find – only £19.50 + VAT for this convector heater with wall mounting option! If you need it “out of the way”, you can mount this heater on the wall.
Cheap convector heater: it does the job and it is very easy to install!
Cheaper Convector Heater for home / office use
- Three basic heat settings: 750W, 1.25kW, and 2kW;
- This convector heater has a Light Indicator;
- Thermostat: a fully adjustable thermostat for effective heat control;
- Heat limit: Automatic Safety Temperature Limit;
- Quick warming up time, heat offered through the top;
- The Cheapest Convector Heater available – the SCAN 2KW convector heater;
- Wall mounting: Secure wall mounted option, brackets and fixings included.
- This heater comes fitted with approved flex;
- Stylish yet simple design, floor or wall mounted heater;
- Dimensions: 580mm width, 105mm depth;
- Heat offered: max. 2kW convection heat;
- Similar heaters: the Dimplex convector heaters, and the portable Dimplex heaters;
- Available for in-store pick-up only;
- Buy online the SCAN 2KW Convector Heater for home / office use.
Install a fan assisted heater in the suspended ceiling to heat up the shop / entrance!
Posted by sparksdirect in ask Mr Sparks, guest expert, heaters, new technologies, technical data, ventilation fans, website update on December 5, 2011
For some reason today it started being even colder than normal – the winter is not only on the way but it is here already! For a home owner it is simple: close the windows, close the door, and make sure the heater is on! When it comes to a retail shop, changing rooms, entrance areas in buildings, large venues with suspended ceilings, etc – how do you heat up and maintain a pleasant warm atmosphere?
There is a solution – the Fan Assisted Heaters for the 600 x 600 mm ceiling grid tiles! The BN Thermic SCHG30 fan assisted ceiling heater provides warm inviting commercial premises. The ceiling mounting position for this fan assisted heater allows free use of floor and wall space, an important consideration in retail premises!
First class whole life value from a product built to the highest possible standard and designed to give many years of trouble free service – the BN Thermic SCHG30 fan assisted heater is of an excellent quality offering first class heating in shops, retail, changing rooms, entrance areas, etc.
SCHG-30 Fan Assisted Ceiling Heater – Features
- This SCH heater is installed in a suspended ceiling and allows free use of floor and wall space;
- Shallow depth: Insert depth of only 153mm;
- Designed to rest in the T bar of a 600 x 600 suspended ceiling grid;
- Air inlet and outlet through front panel: no requirement for air supply from the ceiling void;
- White aluminium egg-crate diffuser;
- Air flow: 220m3/h; weight: 9kg;
- Recommended mounting height: 2.5 – 3.0m;
- Pre-wired to rear mounted terminal enclosure;
- Auto-reset over-temperature protection;
- Simple reduction in output by removal of link in rear mounted enclosure (3kW reduced to 2kW);
- Low running costs by selecting from a range of control options;
- Specifically designed for quick hassle free installation;
- More technical specs and wiring / installation instructions (pdf file);
- Buy online the fan assisted heater for ceiling mounting via SparksDirect.
The HWP2 Patio Heater – IP55 weather resistant 1.5kW Halogen heater for outdoors
Posted by sparksdirect in ask Mr Sparks, heaters, lighting systems, new technologies, products pictures, technical data, website update on March 3, 2010
The BN Thermic HWP2 Patio Heater is a halogen heater for outdoors providing safe and instant warmth in a variety of outdoor environments – ideally used on the patio. The way it works is by emitting short wave radiant energy which cannot be “distracted/cut off” by the breeze. The HWP2 Patio Heater is ideally sited in patios, pavement cafes, pub gardens, golf driving ranges, outdoor restaurants, outdoor smoking areas, etc. It is an economical solution for outdoor heating – its running costs about one third of equivalent gas heater. Being IP55 rated, this patio heater is complete safe to be used outdoors and also to be left outdoors(waterproof). Read more below about the main features of these patio heaters, the areas covered and the auxiliary remote control devices that can be used with the HWP2 Patio Heaters.
HWP2 Patio Heater – More Features
- To be installed outdoors(can also be left outdoors – it is IP55 rated);
- The lamp is replaceable(there are replacement elements for this fitting);
- 5,000 hour lamp life – approximately five times longer than with glass fronted heaters;
- The bracket for wall mounting and the parasol brackets are supplied;
- Finishes available:
- White IP55 Weather Resistant Halogen Heater 1.5KW;
- Black Patio Heater IP55 Outdoor heater (Weather Proof); - Powerful 1.5KW output(1.5kW replacement lamp);
- The cable/lead: 2m cable lead supplied;
- IP rating: IP55 rated(can be used outdoors, even under heavy rain);
- Dimensions: height 120mm, width 480mm, depth/projection 120mm;
- Weight: approx. 1.7kg;
The HWP2 Patio heaters – Weather Resistant Halogen heaters
The HWP2 Patio Heater IP55 Outdoor heater (Weather Proof) - the black version
The HWP2 Patio Heater Weather Resistant Halogen Heater 1.5KW - White finish
Areas covered by the HWP2 Patio Heater
Optional remote mounted control devices
The wall mounted movement se
nsor to ensure that heaters are not energised when an area is unoccupied. The device will switch loads of up to 16 amps (3kW 230V). Larger and three phase loads can be controlled via a suitably rated contactor.
The wall mounted switch timer – capable of directly switching single phase loads up to 20 amps. Larger and three phase loads can be switched via a suitable contactor. The switch is tamper proof and weatherproof to IP54 making it ideal for installation in public areas such as pub gardens. Time delay can be adjusted between 10 and 150 minutes.
The combined dimmer and on/off switch controls loads of up to 13 amps (3kW 230V). This device allows the intensity of a halogen heater to be manually adjusted to suit prevailing conditions.
Buy online the HWP2 Patio Heater – the black patio heater or the white version of this patio heater – online via Heating and Ventilation – Heating Solutions.
bathroom heaters, electric towel rails from Dimplex
Posted by admin in ask Mr Sparks, heaters, new technologies on January 19, 2009
What a difference warm, dry towels make! With a Dimplex towel rail(the Dimplex TR and Dimplex S series) you can have your towels dry and warm all the time, at surprising low running costs.
The popular Dimplex S range is ideal for drying and airing small towels in areas such as kitchens, cloakrooms and ensuites. The low wattage spiral element provides an even surface temperature and very economical operation.
The Dimplex TR range towel rails are permanently liquid filled for maintenance free operation. They can be mounted for left or right hand cable entry. No plumbing. No problems. And they can be left switched on indefinitely.
Towel rail Dimplex TR & S energy saving feature
- The TR and S ranges can be used with the new Dimplex radio frequency controllers and the Dimplex energy regulator DX4123
Bathroom heating towel rail TR Range – features
- A range of five models(see all the models here).
- You can choose the size and finish.
- Oil filled Dimplex towel rails.
- The larger models will help to take the chill off a small bathroom or cloakroom.
- Mains neon indicator.
- Splash-proof (IPX4 rated) for use in bathrooms and other wet areas.
- Supplied with wall mounting brackets as standard.
- Feet are available as an optional extra on selected models.
Towel rail Dimplex S Range – features
- Dry element tubular steel towel rail.
- Durable white stove enamel (S50W, S70) or chrome plated (S50C).
- S50W provides lower surface temperature.
- Suitable for wall mounting only.
- Splash-proof (IPX4 rated) for use in bathrooms and other wet areas.
- Surface temperature is regulated by steady state dissipation of heat from the low wattage element.
Technical specifications of a towel rail
Construction – Dimplex towel rails
- Tubular steel.
- S range – dry element
- TR range – oil filled
Cable Entry
- All models – left or right hand.
- S range only – top or bottom.
Colour/Finish
White stove enamel or chrome plated. As a plated finish radiates less heat away from its surface, the plated models have a lower loading compared with the equivalent physical size stove enamel model, so that both have a similar surface temperature.
IP Rating
Splash-proof IPX4 for bathroom use.
Electrical Connections
Supply cable is provided for connection to the fixed wiring of the premises via a suitable double pole isolating switch. Installation must be carried out strictly in accordance with the current edition of the IEE Wiring Regulations. If the towel rail is fitted in a bathroom essentially these Regulations preclude the use of a plug and socket and any control switch must be normally inaccessible to a person using a fixed bath or shower.
The pull cord of a cord-operated switch is not affected by this Regulation.
Accessory Feet
| TR Range Part No. | |
| TR2212 | Chrome – for TRC130, TRC150 |
| TR2304 | White – for TRS175 |
| Model No. | Loading | Height(A) | Width(B) | Depth(C) | Finish | Accessory Feet |
| TRC 90/W | 60W | 616mm | 533mm | 93mm* | Chrome | - |
| TRS 120/W | 120W | 616mm | 533mm | 93mm* | White | - |
| TRC 130/W | 90W | 851mm | 533mm | 93mm* | Chrome | TR2212** |
| TRC 150/W | 120W | 851mm | 787mm | 93mm* | Chrome | TR2212** |
| TRS 175/W | 175W | 851mm | 533mm | 93mm* | White | TR2304** |
| S50C | 45W | 555mm | 568mm | 93mm* | Chrome | - |
| S50W | 45W | 555mm | 568mm | 93mm* | White | - |
| S70 | 70W | 555mm | 568mm | 93mm* | White | - |
To purchase online towel rail heaters, Dimplex TR and S series, visit the Heating section, Dimplex heaters. Some of the Dimplex towel rails – Dimplex bathroom heaters – found on our website are:
- Dimplex TRC90 60W Electric Wall Mounting Towel Rail – available for In Store Pick-up Only. TRC90 towel rail is permanently liquid filled for maintenance free operation… – buy online Dimplex TRC90.
- Dimplex TRS120 120W Electric Towel Rail – This Towel Rail for bathrooms is available for In Store Pick-up Only. TRS120 towel rail is permanently liquid filled for maintenance free operation…. – buy online Dimplex TRC120.
- Dimplex TRC130 90W Electric Wall Mounting Towel Rail – This Towel Rail for bathrooms is available for In Store Pick-up Only. TRC130 towel rail is permanently liquid filled for maintenance free operation…. – buy online Dimplex TRC130.
- Dimplex TRC175 Electric Wall Mounting Towel Rail – This Towel Rail for bathrooms is available for In Store Pick-up Only. TRC175 towel rail is permanently liquid filled for maintenance free operation…. – buy online Dimplex TRC175.
All the Dimplex heaters for bathrooms – Dimplex towel rails – are for in-store pick up online. You can order online towel rails from Dimplex, and then, after we confirm you, you can come and pick it up from our store in Archway.
Dimplex heater: combination of storage and convector heaters, the CXL/CXLS range
Posted by admin in ask Mr Sparks, heaters, new technologies, technical data on January 9, 2009
This range of heaters from Dimplex offers many of the benefits of the popular manual and automatic storage Dimplex heaters but with the addition of a built in top-up convector heater which provides an independent heat source to supplement stored heat in severe weather, or as the sole heating if heat is required unexpectedly – for example in spring or autumn.
The Dimplex CXLS models incorporate the Dimplex Twin Sensor® automatic charging system, ensuring the correct charge is taken regardless of changing weather conditions without the need for user adjustments, and complying with Building Regulations Part L1, which requires all electric storage heaters installed in new build to be fitted with automatic charge controls.
By providing two heaters in one compact case, the Dimplex range of CXL/CXLS saves space, and its smooth curved styling complements XL storage heaters and PLX panel heaters. The top up convector requires its own electrical supply, has full thermostatic control and frost protection facility.
Energy saving features of the Dimplex CXL/CXLS
The Dimplex CXLS heaters range features automatic charge regulator, which automatically adjusts the level of input charge to compensate for changing weather conditions without user intervention.
Dimplex storage and convector heaters features
Provides a continuous source of warmth, primarily from cheap off peak electricity.
- Convector gives completely silent top-up heating.
- Convector thermostat can be set to maintain constant room temperatures and automatically switch on as necessary.
- The CXL Dimplex range storage heater controls and components based on market leading XL range, including reliable manual input control and room temperature boost for optimum use of stored heat.
- Conveniently positioned convector controls on the front panel.
- Lower convector loadings selectable on installation.
- Secure wall fixing for safety.
- Feet may be fitted under carpet or on top of suitable floor covering.
- Simple assembly for flexible positioning and quick installation.
Technical specifications
Internal Details – Storage Heater
- Storage Core
Material: High density bonded magnetite bricks. - Heating Element
Type: Incoloy sheathed in units of 850W. - Thermal Insulation
Type (a) Front and Rear Panels – microporous silica.
Type (b) Top and Ends – resin free mineral wool.
Type (c) Base – calcium silicate slab. - Supply Connection
Located at front right hand end of base – accessible by removal of front panel assembly. Hidden cable support straps at rear of heater allow neat supply cable connection from either side of heater. - Assembly
Remove front panel assembly then front inner skin. Remove internal packing containing elements, position rear layer of bricks, heating elements, and front layer of bricks.
Storage Controls
The control knobs are positioned on the sloping rear top panel of the heater, and are therefore out of sight of young children. The knobs incorporate a cross bar and raised pointer for ease of operation.
- Charge Controller – CXL
Type: Bi-metal, adjustable from zero charge to fully charged condition - Charge Controller – CXLS
Type: Hydraulic close differential room temperature sensing thermostat with external sensor. - Thermal Safety Device
Type: Bi-metal – manual reset. - Damper Control
Type: Bi-metal strip, selection variable from early to late or zero boost.
Internal Details – Convector Heater
- Element
Type: Stitched Ribbon.
Material: Nickel/Chrome/Iron. Element can be de-rated by 50% on installation. - Supply Connection
Located at front left end of heater base. Cable entry at left hand end. Cable support straps at rear of heater allows neat supply connection from either side of heater.
Convector Controls – Located to right of convector air outlet grille.
- (A) Room Temperature Thermostat
Type: Hydraulic, adjustable. - (B) Safety Cut-Out
Type: Bi-metallic, disconnect supply to reset type. - (C) ON/OFF Switch
Type: Single pole incorporating neon which illuminates when switch is in ON position. - (D) Neon
An additional neon illuminates when convector heater is drawing current. - (E) Wall fixing bracket
Please refer to diagram supplied with the heater for wall fixing detail.
Finish
Willow White top, sides and front panel. Contrasting Birch Grey grille, rear heat shield and wall spacer.
Construction Details
Galvanised finish sheet steel base, mounted on steel feet, supporting double skin front and outer panels. One piece front panel/grille assembly and front inner skin remove for brick loading.
Packing
- Case Assembly and Weights
Containing assembled heater case and heating elements. Packed in single carton. - Storage Bricks
Supplied, 2 bricks per pack. Approx brick weight 7.5kg each. (See the table for weight of heater with and without bricks).
| Model | Weight without bricks | Weight with bricks | No. of bricks |
| CXL12/CXLS12 | 19.5kg | 77kg | 8 |
| CXL18/CXLS18 | 24kg | 111kg | 12 |
| CXL24/CXLS24 | 29.5kg | 146kg | 16 |
Shelf – An attractive shelf is available in 3 lengths.
| Model | CXL12/CXLS12 | CXL18/CXLS18 | CXL24/CXLS24 |
| Storage Heater performance Input Rating |
1.7kW | 2.55kW | 3.4k |
| Charge Acceptance | 11.9kWh | 17.85kWh | 23.8kWh |
| Convector Heater performance Maximum Output |
900W | 1450W | 2000W |
| Other outputs available (Set on installation) |
450W | 450W, 1000W | 650W, 1350W |
| Height (A) | 706mm | 706mm | 706mm |
| Width (B) | 565mm | 793mm | 1021mm |
| Depth (C) | 193mm | 193mm | 193mm |
| Height above floor | 88mm | 88mm | 88mm |
| Installed Weight | 77kg | 111kg | 146kg |
You can purchase Dimplex storage and convector heaters – the Dimplex CXL and CXLS series – from our online store, at the Heating and Ventilation section, Heating, Dimplex Heaters. The available models are:
- Dimplex CXL12N heater – Dimplex COMBI 1.7KW STO 0.9KW CON Storage And Convector Heater
- Dimplex CXL 18N heater – Dimplex COMBI 2.55KW STO 1.45KW CON Storage And Convector Heater
- Dimplex CXL24N heater – Dimplex COMBI 3.4KW STO 2KW CON Storage And Convector Heater
All these models from the Dimplex Storage and Convector Heaters are available for in-store pick-up only, after you have placed an order on our website and we confirm the date when you can come and pick them up. The above article was taken from the official description of the Dimplex heaters, and can be found here.