The Hager Invicta 3 125A TP&N Distribution Boards

• Surface mounted steel enclosures.
• IP3X protected to BS EN 60529.
• Enclosures are available with plain or glazed doors.
• Fully shrouded copper busbar, rated short-time withstand current 25kA conditional.
• Supplied without incoming and outgoing devices.
• A Hager incoming kit must be used.
• Designed and tested for BS EN 60439-3.

Hager Invicta 3  – 125A Incoming 63A Outgoing Type N Distribution Boards

• 4 Triple Pole Ways – JK104B(Plain door), JK104BG(Glazed door);
• 6 Triple Pole Ways – JK106B(Plain door), JK106BG(Glazed door);
• 8 Triple Pole Ways – JK108B(Plain door), JK108BG(Glazed door);
• 12 Triple Pole Ways – JK112B(Plain door), JK112BG(Glazed door);
• 16 Triple Pole Ways – JK116B(Plain door), JK116BG(Glazed door).
• Buy online Hager Invicta 3 125A Type N Distribution boards;

Hager Invicta 3 – 125A Incomer Kits

• 3 Pole 100A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK11003S;
• 4 Pole 100A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK11004S;
• 3 Pole 125A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK11253S;
• 4 Pole 63A Contactor Incomer Kit includes Switch Disconnector(fits below distribution board) – Hager JK10634C;
• 4 Pole 100A Contactor Incomer Kit includes Switch Disconnector(fits below distribution board) – Hager JK11004C;
• 125A Direct Connection Kit (fits within distribution board) – Hager JK11254D;
• 4 Pole 63A 30mA RCCB Incomer Kit (fits within distribution board) – Hager JK10634RH;
• 4 Pole 100A 30mA RCCB Incomer Kit (fits within distribution board) – Hager JK11004RH;
• 4 Pole 100A 300mA RCCB Incomer Kit (fits within distribution board) – Hager JK11004RL;
• 4 Pole 100A 300mA Time Delayed RCCB Incomer Kit (fits within distribution board) – Hager JK11004RLD;
• 4 Pole 100A 100mA RCCB Incomer Kit (fits within distribution board) – Hager JK11004RM;
• 4 Pole 100A 100mA Time Delayed RCCB Incomer Kit (fits within distribution board) – Hager JK11004RMD;
• Buy online Hager Invicta 3 125A Incomer Kits;

Hager Invicta 3 125A Meter Packs

• These kits fit into the main distribution board (small cable extension box may be required for the JK104B(G) and JK106B(G) if more cable space is required).
• Each meter pack contains:
  - Meter, 3 Pole CT Block, 3 x Fuses & Carriers on DIN rail, Wiring Loom, Incoming Shroud,
  - Instructions (including torque settings for electrical connections) plus Off Set Incoming Links and Neutral Connection Block.

Hager Invicta 3 250A TP&N Distribution Boards

• Surface mounted steel enclosures.
• IP3X protected to BS EN 60529.
• Enclosures are available with plain or glazed doors.
• Fully shrouded copper busbar, rated short-time withstand current 25kA conditional.
• Supplied without incoming and outgoing devices.
• A Hager incoming kit must be used.
• Designed and tested for BS EN 60439-3.

Hager Invicta 3 – 250A Incoming, 63A Outgoing

• 8 Triple Pole Ways – Hager JK208B(Plain door), Hager JK208BG(Glazed door);
• 12 Triple Pole Ways – Hager JK212B(Plain door), Hager JK212BG(Glazed door);
• 16 Triple Pole Ways – Hager JK216B(Plain door), Hager JK216BG(Glazed door);
• 18 Triple Pole Ways – Hager JK218B(Plain door), Hager JK218BG(Glazed door);
• 24 Triple Pole Ways – Hager JK224B(Plain door), Hager JK224BG(Glazed door).
• Buy online Hager Invicta 3 250A Type N Distribution Boards;

Hager Invicta 3 250A Incomer Kits

• 3 Pole 100A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK21003S;
• 4 Pole 100A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK21004S;
• 3 Pole 125A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK21253S;
• 3 Pole 250A MCCB Incomer Kit (fits within distribution board) – Hager JK22503MC;
• 4 Pole 250A MCCB Incomer Kit (fits within distribution board) – Hager JK22504MC;
• 3 Pole 250A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK22503S;
• 4 Pole 250A Switch Disconnector Incomer Kit (fits within distribution board) – Hager JK22504S;
• 4 Pole 250A Direct Connection Kit (fits within distribution board) – Hager JK22504D;
• 4 Pole 160A Contactor Incomer Kit includes Switch Disconnector(fits below distribution board – A space is required below the board to fit) – Hager JK21604C;
• 3 Pole 125A MCCB Incomer Kit (fits within distribution board) – Hager JK21253MC;
• 4 Pole 125A MCCB Incomer Kit (fits within distribution board) – Hager JK21254MC.
• Buy online Hager Invicta 3 250A incomer kits;

Invicta 3 125A Dual Metered Boards & Data Loggers

• The lighting and power meter board is a compact solution to meet the demands of energy metering within non-dwelling buildings.
• The metered boards are supplied with meters that offer a pulsed output. For modbus output please contact Hager.
• The board is provided with the incomer pre-fitted helping to save on installation time.
• About the Hager Dual Meter Incomer Kits – Each meter pack contains: Meter, 3 Pole CT Block, 3 x Fuses & Carriers on DIN rail, Wiring Loom, Incoming Shroud, Instructions (including torque settings for electrical connections), Off Set Incoming Links, Neutral Connection Block and Extension Box with Glazed Doors

To find out more about the Invicta 3 range from Hager you can also take a look at the new design and features of the Invicta 3 range, 4 reasons for specifying the Invicta 3 Type N boards, how the Invicta 3 Distribution Boards meet the needs of the 17th edition, and More features and benefits of Invicta Distribution Boards. Remember:

The Hager Invicta range of Type N Distribution Boards offers an Invicta 125A panel board option (400A incoming and 125A outgoing), and an Invicta 250A panel board (800A incoming and 250A outgoing) option.

1. The Invicta 3 250A Panel Boards from Hager, the Door Options – Overall reversible door (plain or glazed) with optional key locking facility.
2. The Hager Invicta 250A Distribution Boards Gland Plates – Removable gland plates top and bottom.

3. The Invicta 3 250A Panel Boards from Hager, the Busbar System – Totally enclosed busbar system rated at 800A.
4. The Hager Invicta 250A Distribution Boards Disconnect Facility – Wrap-around neutral bar with disconnect facility as standard.

5. The Invicta 3 250A Panel Boards from Hager, the MCCBs – SP and TP MCCBs.
6. The Hager Invicta 250A Distribution Boards Shroud – Incoming shroud.

Some of the 250A Distribution Boards from Hager, in the Invicta 3 series, found on our website, are:

• JK218BG – New: Hager 18 Way Invicta 3 250A Type B TPN Distribution Board Glazed Board;
• JK224BG – New: Hager 24 Way Invicta 3 250A Type B TPN Distribution Board Glazed Board;

The Invicta 3 range offers a 125A panel board option (400A incoming and 125A outgoing), and a 250A panel board (800A incoming and 250A outgoing) option.

1. 125A Invicta 3 Distribution Boards Door Options – Overall reversible plain (or glazed) door with optional key locking facility.
2. The Hager Invicta 125A Type N Busbar System – Totally enclosed busbar system rated at 400A.

3. 125A Invicta 3 Distribution Boards Gland Plates – Removable gland plates (top and bottom).
4. The Hager Invicta 125A Type N Disconnect Facility – Wrap-around neutral bar with disconnect facility as standard.

5. 125A Invicta 3 Distribution Boards Steel Enclosures – Robust powder coated sheet steel enclosures.
6. The Hager Invicta 125A Type N Ease of Cabling – Wrap-around earth bars for ease of cabling.

Models of Hager Invicta 3 125A Distribution Boards found on our website:

• JK104BG – New: Hager 4 way TP&N Distribution Board Glazed Door, 17th edition;
• JK106BG – New: Hager 6 way TPN Distribution Board Glazed Door, 17th edition(Invicta 3);
• JK108BG – New: Hager 8 way TPN Distribution Board Glazed Door, 17th edition(Invicta 3);
• JK112BG – New: Hager 12 Way TP&N Distribution Board 125A Glazed Door, 17th edition;
• JK116BG – New: Hager 16 way TPN Distribution Board Glazed Door, 17th edition(Invicta 3);

1. The Door Options: The Invicta 3 range of Type N Distribution Boards from Hager has an overall reversible door (plain or glazed) with an optional key locking facility.

2. The Gland Plates: This range of Invicta 3 Distribution Boards has removable gland plates at the top and the bottom.

3. The Busbar System: The Invicta 3 range of Type N Distribution Boards from Hager  has a totally enclosed busbar system rated at 800A.

4. The Disconnect Facility: This range of Invicta 3 Distribution Boards has a Wrap-around neutral bar with the disconnect facility as standard.

5. The MCCBs: The Invicta 3 range of Type N Distribution Boards from Hager takes SP and TP MCCBs.

6. The Shroud: This range of Invicta 3 Distribution Boards has an incoming shroud.

To purchase the Invicta 3 range of Type N Distribution Boards manufactured by Hager, please visit the Hager Industrial Consumer units.

1. Top Tap Off - 100A top tap off allows for the Invicta 3 Type B board extensions or MCB up to 100A with connection kit.

2. Shrouded Neutral Bar – Clear shrouded neutral bar to IP2X allows the contractor to install cables without removing the shroud. This ensures the safe and easy installation of the Invicta 3 Type B distribution boards.

3. Trunking Entry - The unique trunking entry obround system top and bottom enables the quick fitting of the Invicta 3 Type B distribution boards to trunking and without the extra cost in time and materials.

4. Clear Labeling – The L1, L2, L3 on moulding are visible with and without the front cover of the Hager Invicta 3 Distribution Board fitted, which show through the cover for ease of phase identification.

5. Single Pole Blank - New single pole blank design is easy to fit to both three phase boards and on a full DIN rail (single phase and DIN rail extension boxes).

6. Metering - The metering is integral with the main board of the Invicta 3 Type B – no need for an additional extension box – this is saving you both time and money.

Again, you can find this guide online via Hager – Invicta 3 Distribution Boards Hager – and, to purchase this range of Type B Distribution Boards(the Hager Invicta 3), visit our website – Industrial Consumer Units.

The Hager Invicta 3 Type B Distribution Boards – Benefits

• Multiple incomer choices for 125A and 250A boards.
• Optimal cabling space.
• Earth and neutral bars positioned for easier cabling.
• Screws on earth and neutral bars need less turns to fit cable.
• Unique trunking entry system – no need for paxolin.
• Metering fitted next to incomer / within board.
• Wide range of extension boxes for side, top and bottom.
• No spacers needed to mount boards, cableways or extension boxes.
• Removable door and front cover for ease of fitting.
• 125A tap off for board extensions or MCB.

4 reasons FOR the Invicta 3 Type B distribution boards

This new range of Invicta 3 Type B boards from Hager is packed full of features to help make your life easier. There are many reasons why they should be at the top of your list. Here are just four of these reasons:

Reason 1: Trunking Cable Entry

The Invicta Type B board has an end plate that is adapted for coupling to trunking. Simply remove the gland plate from the top or bottom of the board to leave a smooth return edge. This allows flush coupling to trunking and a smooth entry for cables to meet the requirements of the regulations. Paxolin and other time consuming solutions are a thing of the past.

Reason 2: Earth and Neutral Bars

The earth and neutral bars are positioned and designed for simpler installation. The neutral bars have transparent IP2X shrouding to make cabling easier. The screws on both need less turns to fix the cable.

Reason 3: Metering

The metering kit fits directly into the main board. This saves space and means that there is no need for an extension box.

Reason 4: Glazed Door

The Invicta Type B board is the best-looking distribution board on the market. Its glazed door allows ‘ordinary persons’ as defined by the 17th Edition to look into the board while denying them access through a lock.

Read more about the Hager Industrial Distribution Boards, the Invicta 3 Type B boards – meeting the 17th edition needs – and buy online the Invicta 3 range from Hager.

Introducing the new Hager Type B Distribution Boards – meeting the needs of the 17th Edition – part of the Industrial Distribution Boards; the Invicta 3 range: decisions, features, and benefits.

Decisions needed for the Distribution needs

• Regarding the 17th Edition
  Often more final circuits will need RCD protection. With multiple PCs, printers and other equipment likely to have a small earth leakage, nuisance tripping may be an issue. Consider having more outgoing ways and individual RCBO protection to avoid nuisance tripping.
• Regarding the Metering
  The Building Regulations Part L2 includes requirements for metering and sub metering in non-domestic buildings.
• Regarding the Control
  Demand for energy efficiency has led to an increased demand for control. Consider Type B boards that have integral DIN rails for control devices and that allow different size extension boxes to be fitted on the top, bottom or sides of the board.
• Regarding the Installation
  More outgoing ways, more RCBOs, more metering and more control devices means that ease of installation and cabling are important.

You must consider having more outgoing ways and individual RCBO protection in order to avoid nuisance tripping.

The Type B Distribution Boards – Features

The Hager’s Type B distribution boards are designed to help electrical installers meet the challenges of a modern installation. They are available in both 125A and 250A ratings. Read more below about some of the main features of the Hager Distribution Boards(Type B):

• The Ease of metering
  You can install a meter next to the incoming device in the 125A board. Dual metered boards are also available. Another option is to install a surge protection device.
• The Simple cable entry
  Trunking and cable entry facility means there is no need to use paxolin. Cable protection is built into the end-plate cable entry.
• The Neutral bars
  Transparent IP2X neutral cover allows for ease of cable installation. Screws fully turned down for easy and fast cabling.
• The Earth terminal cabling
  Earth terminal bars are mounted offset to neutral terminal bars and angled towards the installer for easy cable installation. The screws are fully turned down for simple and fast cabling.
• The Simple extensions
  18 and 36 module DIN rail extension boxes are available. No spacers required to mount boards, cableways or extension boxes. Boxes can be mounted at the top or to either side of the board.
• The Tap off board extension
  125A top tap off for simple board extensions or for an additional MCB up to 125A.
• The Clear labeling
  Ease of phase identification L1, L2, L3 mouldings show through when the front cover is fitted. Textured surface on busbar assembly allows contractor to write circuit identification.

The Hager Type B Distribution Boards – Benefits

Hager has developed the new Invicta Type B boards as a solution for modern commercial installations.  The whole nature of electrical sub and final distribution for commercial installations has changed in the last few years. Typically there are more outgoing ways, more RCBOs and/or RCD protection, more metering and more control devices.

Electrical distribution is at the heart of a building’s services. Modern distribution boards must enable designs that meet the demands of the 17th Edition, the need for more metering and the demands for energy efficient solutions through control devices or building management systems.

The people at Hager decided that it was time to design a board that meets the needs of current installations, not those of the past. This new range of Type B boards makes it easier for you to design and install electrical distribution systems that meet the needs of today and the future.

Note: These information are from the official specs presented by Hager – the Invicta 3 range. We are now in the process of updating our full offer of Hager Type B Distribution Boards – the Invicta 3 range – some of which are: Hager JK112BG, Hager JK116BG, Hager JK11003S, Hager JK11253S, Hager JK11004S, Hager JK104BG, Hager JK106BG, etc.