Blog Sparks Direct
Posts Tagged dolly switches
Forbes and Lomax with metal rockers and new details about the Forbes&Lomax switches/dimmer switches
Posted by sparksdirect in customer service, light dimmers, products pictures, switches and sockets, technical data, website update on October 28, 2009
Forbes and Lomax is a very appreciated brand of flat plate switches, sockets, dimmers, fused connections, telecom and data sockets, etc. We have introduced this range many times before, speaking about all the finishes and ranges, defining the Forbes & Lomax wiring accessories, some instructions for the electricians about switches&dimmers, data for electricians about sockets, and a short word of introduction for each of the ranges Forbes and Lomax has. Recently, Forbes and Lomax modified a little their offer – they added new codes/model numbers for the accessories with the metal rocker. Here is how it goes:
- Unless the model number has a “/B“, the trim / insert / surround is white plastic(unless the wiring accessory does not have any surround – like the dimmers, blanking plates, etc).
- In the case of the switches, the sockets, and the fused connections, unless the model number has a “M” at the end of it, right before the first “/“, it has a plastic rocker.
- If certain models do not have the “M” version, this means that there is no version of that particular wiring device that has a metal rocker – only the version with the plastic rocker is available. The same is true the other way around: if there is only the “M” version, then the plastic rocker version is not available.
Read more below about some technical details for the Forbes and Lomax Dolly/Toggle switches, the Rotary Dimmers / Push on/off switches, or the rocker switches.
More technical details about the Forbes and Lomax Switches & Dimmers
About The Forbes and Lomax Dolly / Toggle Switches
All dolly switches fit into standard 35mm deep wall boxes with the exception of the architrave which requires a special wall box. Check out the dolly switch combinations that Forbes and Lomax offers. If the combination that you require is not listed on our website, please let us know – contact us. As standard we supply two-way switches that can be used as either one-way or two-way. One-way switching is where you can control a lighting circuit from only one location. Two-way switching is where you can control a lighting circuit from two locations. Intermediate switches are used if you want to add more switching locations. A two-way switch would be located at each end of the circuit and any additional switches would be intermediate.
About the Rotary Dimmers and the Push On/Off Switches
Good quality electronic transformers can be used with 250w, 400w, 600w & 1000w resistive dimmers for low voltage lighting. The Forbes and Lomax dimmers are not suitable for use with trailing edge transformers. To ensure full compatibility and a long life for the dimmer, we recommend that you use Mode transformers. Inductive dimmers for use with wirewound transformers and dimmers for fluorescent lighting are available on request. Matching push on/off switches allow us to provide switches that look like a dimmer and offer the ability to mix dimmers and switches on the same plate whilst keeping a uniform look. We can provide up to 9 gang combinations. All the Forbes and Lomax dimmers and switches are 2 way. Intermediate or 0-10v push on/off switches are available on request.
About the Forbes & Lomax Rocker Switches
The Forbes and Lomax Rocker Switches come with a white trim around the switch insert as standard. Suffix code with (B) for black trim, except on Antique Bronze where black is standard. Double Pole, 2way & off and retractive rockers are available on request. We can also make one and two gang rocker switches with ‘Painted Plates’ on request and can provide up to 12 gang rocker switch combinations in all other finishes.
Read more about the Forbes and Lomax different finishes, like: the invisible plate(with pictures), the unlacquered brass range, the antique brass range, the nickel silver range, the painted socket range, or the stainless steel range.
Defining the Forbes and Lomax wiring devices, the types(dimmers, switches, sockets, etc)
Posted by sparksdirect in light dimmers, switches and sockets, technical data on August 10, 2009
Forbes and Lomax has a complete range of dimmers, switches and socket outlets are available to suit the exacting demands of architects and interior designers of both traditional and contemporary persuasion. The switches manufactured by Forbes & Lomax have pioneered the screwless, flush to the wall plate, creating a very sleek look. As well as the Invisible Lightswitch, the company also offers other finishes like: the Invisible plate range (pictures), the Unlacquered Brass range, the Antique Bronze range, the Nickel Silver range, the painted socket range, or the stainless steel range, all of which are accompanied by a full range of matching outlets. To find out more about the the Forbes and Lomax switches, sockets and dimmers, all finishes, all ranges, consult the Articles about the Switches and sockets section. Below, we would like to introduce and define some Forbes & Lomax wiring devices like: The Dimming System, the Dolly Switch, the Button Dimmer Controller, the Rocker Switch, the Rotary Dimmer, and the Sockets.
The Forbes and Lomax dimming system
The Dimming System from Forbes and Lomax is a four channel dimmer with four easily programmable scenes in addition to full manual dimming and on/off buttons. The system is easily installed and quick to program.
The programming and operation is achieved from a master panel, with slave panes and remote controls also available if control is required from additional locations. The Dimming System is available in all finishes with a choice of white or black buttons. Contact us for more information.
To purchase the dimming systems manufactured by Forbes & Lomax(available in all the finishes), do not hesitate to contact us.
The Forbes and Lomax Dolly Switches
The dolly switches / toggle switches are lever switches with a retaining ring that holds the face plate in place leaving no need for fixing screws.
They are available in all colours and configurations and can be mixed with Button Dimmer Controllers on the same plate if required.
To purchase online Dolly Switches manufactured by Forbes and Lomax, visit the Forbes & Lomax section and select the desired finish / wiring accessory.
The Forbes & Lomax Button Dimmer Controllers
The Button Dimmer Controller is a push-to-make momentary action switch that controls an In-Line Dimmer Pack. The system allows the dimming of a light circuit from more than one position.
Combinations of Button Dimmer Controllers and dolly(toggle) switches on the same plate are available. Button Dimmer Controllers can also be used to control other lighting or home automation systems that require a simple momentary contact closure switch.
To purchase online Button Dimmer Controllers manufactured by Forbes and Lomax, visit the Forbes & Lomax section and select the desired finish / wiring accessory.
The Forbes and Lomax Rocker Switches
A complete range of rocker switches is available in either black, white or metal, to match the plate finishes. These kind of switches are the more “classical” switches everyone is used with.
The Metal switches have a slim plastic trim around them in either black or white – black insert or white insert.
To purchase online Rocker Switches manufactured by Forbes and Lomax, visit the Forbes & Lomax section and select the desired finish / wiring accessory.
The Forbes and Lomax Rotary dimmers
Rotary dimmers push in to switch on and off and rotate to dim or brighten. Intelligent Dimmers are the same in appearance to the standard rotary dimmer but include a few extra features. Intelligent dimmers are a soft start so instead of switching the light up to the set intensity immediately, it will turn on the light with a slight graduation which is kinder to the bulb. Intelligent Dimmers are also programmed to detect and overload and are better at controlling ‘difficult’ loads such as when low-voltage and mains voltage lamps are mixed on the same circuit. Intelligent Dimmers are so suitable for wirewound (toroidal) transformers as well as good quality electronic transformers.
To purchase online Rotary Dimmers manufactured by Forbes and Lomax, visit the Forbes & Lomax section and select the desired finish / wiring accessory.
The Forbes & Lomax Sockets
A full range of socket outlets and fused connections are available in all finishes. Socket types include 13amp, 5amp, 2amp, TV, telecom, data, audio, shaver and floor sockets. A choice of black and white inserts is available. The 13amp sockets and the switched fused connections can be supplied with metal switches if desired.
The European sockets are also available in all finishes. As with all our sockets, they fit flush to the wall and come with white or black inserts. All the European sockets must be installed into British Standard wall boxes which must be recessed into the wall by 6mm.
To purchase online different kinds of Sockets manufactured by Forbes and Lomax, visit the Forbes & Lomax section and select the desired finish / wiring accessory.
Introducing Forbes and Lomax ranges of Invisible LightSwitch, Unlacquered Brass and Stainless Steel
Posted by sparksdirect in ask Mr Sparks, light dimmers, switches and sockets, technical data, website update on August 7, 2009
To find out more about the Forbes and Lomax ranges of switches and sockets, you can consult the Forbes and Lomax switches, sockets and dimmers, all finishes, all ranges, or the Invisible plate range and pictures, the Unlacquered Brass range, the Antique Bronze range, the Nickel Silver range, the painted socket range, or the stainless steel range.
Established 20 years ago, Forbes & Lomax have from the start approached the electrical accessory market from an aesthetic point of view. In 1988 the elegant glass, nickel and brass switches of the 1930’s were no longer available and the modern equivalents were ugly and unsuitable for the prestigious projects that interior designers were working on at that time.
It was with these problems in mind that Forbes & Lomax launched The Invisible Lightswitch, a simple transparent acrylic plate allowing the wallpaper or paint to show through, with a stylish metal toggle switch in the centre. These switches were able to combine an attractive design with all the advantages of modern technology.
To complement the Invisible Lightswitch, a complete range of dimmers and outlets are available to suit the exacting demands of architects and interior designers of both traditional and contemporary persuasion. Over the years Forbes & Lomax have improved and added to the range, producing high quality switches, sockets and dimmers in a variety of finishes to suit the demands of both traditional and contemporary architects and interior designers as well as the electrical contractors that form the main backbone of our customer base.
With their switches, Forbes & Lomax have pioneered the screwless, flush to the wall plate, creating a very sleek look. As well as the Invisible Lightswitch , the company also offer unlacquered brass, nickel silver, brushed stainless steel and antique bronze switches, all of which are accompanied by a full range of matching outlets. In this article you will find out a little more about these particular finishes, which, by the way, have already been introduced on our blog(see Forbes & Lomax, switches and sockets, etc). New products are constantly being added to the range in order to keep up with customers’ requirements.
Read more about the Invisible LightSwitch(the invisible plate), the Unlacquered Brass range, and the Stainless Steel range below (also: more about the Nickel Silver range, the Antique Bronze range, and the The Painted Socket range).
Forbes and Lomax – the The Invisible LightSwitch, the Invisible Plate range
Inspired by 1930’s glass switches but with all the advantages of modern technology, The Invisible Lightswitch has become synonymous with Forbes & Lomax.
Switches and dimmers have 3mm bevelled transparent acrylic plates which are secured without the use of fixing screws. The plates are flush to the wall and are supplied with brass, nickel silver, stainless steel or antique bronze toggle switches or dimmer knobs and buttons. Invisible outlets with 3mm thick acrylic plates complete the range.
1mm thick inner plates of primed aluminum sit behind the Invisible plates which can be decorated in the same way as the walls, giving the illusion that the wallpaper or paint finish runs seamlessly behind the switchplate.
Read more about the Invisible plate – and see lots of nice pictures of the different wiring devices – online, or buy the Invisible range of wiring devices via SparksDirect.
Forbes and Lomax – The Unlacquered Brass range
The Unlacquered Brass range has a flush to the wall plate that is designed to mellow and tarnish in color with age if left unpolished.
This is particularly suitable for period buildings where a bright brass look might be inappropriate. Alternatively, the plates can be polished to give a shiny look should this be required.
Although more of a traditional finish in its appearance, the variety of Unlacquered Brass products that we have available will meet all the demands of modern living.
Read more about the Unlacquered Brass wiring devices and buy online Unlacquered Brass switches and sockets via SparksDirect.
Forbes and Lomax – The Stainless Steel range
The Stainless Steel range of switches and outlets has brushed stainless steel plates. At only 1.8mm thick the plates sit flush to the wall and suit contemporary interiors or kitchens.
The wide range of socket outlets that we offer include a selection of network and audio visual sockets to suit the needs of the most high-tech installations.
A whole array of fused connections and cooker switches provide all you need to control and power your kitchen appliances.
Read more about the Stainless Steel wiring devices and buy online Stainless Steel switches and sockets manufactured by Forbes and Lomax via SparksDirect.
Read more about the Nickel Silver range, the Antique Bronze range, and the The Painted Socket range of wiring devices, manufactured by Forbes & Lomax.
The stainless steel range of switches, dimmers and sockets from Forbes and Lomax
Posted by admin in electrical products, light dimmers, products pictures, switches and sockets, website update on March 23, 2009
Forbes and Lomax is one of the top manufacturers of flat metal plate switches, dimmers and sockets, offering high quality stylish wiring devices for both domestic and commercial use. On our website you can find a wide range of Forbes & Lomax flat plate wiring devices in the following finishes:
- Invisible plate switches and sockets;
- Unlacquered brass switches and sockets;
- Stainless Steel switches, sockets, dimmers;
- Antique Bronze sockets, switches and dimmers;
- Painted sockets;
- Nickel Silver finished dimmers, sockets and switches;
The Forbes&Lomax Stainless Steel range of switches, sockets and dimmers has brushed stainless steel plates. At only 1.8 mm thick, the plates sit flush with the wall and suit contemporary interiors or kitchens. The wide range of socket outlets that Forbes and Lomax offers include a selection of network and audio visual sockets to suit the needs of the most high-tech installations. Also, a whole array of fused connections and cooker switches provide all you need to control and power your kitchen appliances. Read more below about the formats available, the features and dimensions of the stainless steel range, and the available models from Forbes&Lomax.
Stainless Steel range from Forbes & Lomax – available formats
- Dolly switch;
- European sockets;
- Rotary dimmer;
- Dimming system;
- Sockets.
Features and dimensions of the Forbes and Lomax Stainless Steel range
- Single plate: 86 x 86 mm;
- Double plate: 86 x 146 mm;
- Depth of plate: 1.8mm;;
- All the switches conform to BS EN 60669/1;
- The 13A sockets conform to BS1363; the 2A and 5A sockets conform to BS546;
- A full range of stainless steel socket outlets are available, including power outlets, telecom and data, audio and visual, fused connections and floor sockets;
- All the Forbes and Lomax stainless steel switches and sockets require British Standard 35mm deep flush wall boxes;
- All the Forbes and Lomax stainless steel products must be fitted by a qualified electrician.
Forbes & Lomax Stainless Steel – available models
Forbes & Lomax, the Stainless Steel range – button dimmer controller and 16A French socket with white insert.
Forbes and Lomax, the Stainless Steel range – rotary dimmer and dolly switch.
Forbes & Lomax, the Stainless Steel range – double 13A socket with black insert and dimming system(System 2) with black buttons.
The above models are “general” and specific ones, which can also have other features added/can be in more finishes and with different ways/gangs. To purchase the Forbes and Lomax switches, sockets and dimmers in stainless steel finish from our website, please visit the Flat plate switches/sockets, Metal plate, Forbes & Lomax(read the article introducing all the ranges from Forbes and Lomax). If you do not find a specific stainless steel switch, socket or dimmer manufactured by Forbes and Lomax, do not hesitate to contact us(or leave us a comment).
Forbes & Lomax Unlacquered Brass range of dimmers, sockets and switches
Posted by admin in electrical products, light dimmers, products pictures, switches and sockets, website update on March 21, 2009
Forbes and Lomax is a high quality flat plate metal/plastic finish for switches, sockets, and dimmers manufacturer, based in UK. Some of the finishes and plates it produces are: The Invisible Plate, the Unlacquered Brass, the Antique Bronze, the Nickel Silver, the Stainless Steel, the Painted Socket, etc. The Unlacquered Brass range has brass plates that are designed to mellow with age if left unpolished. This is particularly suitable for period buildings where a bright brass would look inappropriate. Alternatively, the plates can easily be polished to give a shiny look should this be required. Read more about the formats available, the features and the models(with pictures) of this finish(unlacquered brass) from Forbes and Lomax.
Although more of a traditional finish in its appearance, the variety of Unlacquered Brass products that are available will meet all the demands of modern living. The formats available:
- Forbes and Lomax Dolly switch;
- Forbes and Lomax European sockets;
- Forbes and Lomax Rotary dimmer;
- Forbes and Lomax Dimming system;
- Forbes and Lomax Sockets.
The Unlacquered Brass from Forbes&Lomax: Features and dimensions
- Single plate: 86 x 86 mm;
- Double plate: 86 x 146 mm;
- Depth of plate: 1.8mm;
- All the switches conform to BS EN 60669/1;
- The 13A sockets conform to BS1363; the 2A and 5A sockets conform to BS546;
- A full range of unlacquered brass socket outlets are available, including power outlets, telecom and data, audio and visual, fused connections and floor sockets;
- All the Forbes and Lomax unlacquered brass switches and sockets require British Standard 35mm deep flush wall boxes;
- The Forbes and Lomax unlacquered brass range must be fitted by a qualified electrician.
Models of switches, sockets, dimmers, etc Forbes and Lomax offers, in the Unlacquered Brass finish
Forbes and Lomax Unlacquered Brass – Rotary Dimmer and Rocker Switch
Forbes & Lomax Unlacquered Brass – single German Schuko socket with white insert and Dolly Switch
Forbes and Lomax Unlacquered Brass – Button Dimmer Controller and single 13A socket with white insert
Forbes & Lomax Unlacquered brass Dimming System (System 2) with white buttons.
To purchase online sockets, switches, dimmers, etc in Unlacquered Brass finish, manufactured by Forbes and Lomax, consult our online catalogue, and order securely via our online store(read the article introducing all the ranges from Forbes and Lomax). If you do not find one of the models you are looking for, do not hesitate to contact us, requesting for a quote or simply call us.