How Powerful a Heater Do We Need to Make The Office a Little Bit Warmer?

How Powerful a Heater Do We Need to Make The Office a Little Bit Warmer?

In the long process of updating our store to a snazzy new system, we’ve been wondering about some of the things we sell. How is an ES lamp base different from an E27, and who came up with that system in the first place? How low can we hang a ceiling pendant before it becomes effectively useless?

Today, we wondered: how powerful a heater would we need to make this office a little bit warmer? The answer turned out to be simpler than we thought, and then it got more complicated (see a picture presentation of our affordable heating solutions for office).

More Square Footage = More Wattage

Although your new heating system has thermostatic controls, that doesn’t mean it will have sufficient power to heat the room to that temperature. Larger spaces need more heating power (and vice versa). for non-industrial purposes, it’s best to think of it in terms of wattage per square foot.

Here’s a quick and rough guide to the power needs of different-sized rooms (based on generally accepted stats and technical specs for Convector Heaters).

Area of Room (square feet) Recommended Heater Wattage
50ft² 350W
100ft² 900W
150ft² 1350W (1.35kW)
200ft² 1800W (1.8kW)
300ft² 2700W (2.7kW)
400ft² 3600W (3.6kW)
500ft² 4500W (4.5kW)
800ft² 7200W (7.2kW)
1000ft² 9000W (9kW)

(Source)

If you’re heating a whole space, this is a handy reference, but whole-room heating isn’t always the whole picture in every application. In some cases, other methods can replace or complement a space’s general heating.

Some Relatively Uncommon Heating Applications

Over-door heaters such as the Dimplex AC3N, or “air curtains,” are often used in commercial and retail spaces to combat cold draughts from open doors – and to keep out insects and other pests!

Similarly, a floor heater such as the FFIH recessed floor heater can help keep out draughts that infiltrate a room from underneath the door. This particular fitting doesn’t even require an under-floor air supply; there are inlets and outlets on the grille face itself. However, if it will face a lot of foot traffic, make sure it won’t crack or break.

Looking to more domestic applications, the plants in a greenhouse will often succumb to freezing temperatures in the winter, but these spaces do not require the same level of heating as, say, a similarly-sized bathroom. In these cases, a thermostatic “frost protection” heater will heat the space to a relatively low temperature to keep those plants healthy.

These are just a few examples, of course, and everyone reading this will have different requirements that can’t be summed up in a blog post. If you have questions, why not leave a comment or better yet: pop into our showroom?

Photo via, Office.

Install a fan assisted heater in the suspended ceiling to heat up the shop / entrance!

Install a fan assisted heater in the suspended ceiling to heat up the shop / entrance!For some reason today it started being even colder than normal – the winter is not only on the way but it is here already! For a home owner it is simple: close the windows, close the door, and make sure the heater is on! When it comes to a retail shop, changing rooms, entrance areas in buildings, large venues with suspended ceilings, etc – how do you heat up and maintain a pleasant warm atmosphere?

There is a solution – the Fan Assisted Heaters for the 600 x 600 mm ceiling grid tiles! The BN Thermic SCHG30 fan assisted ceiling heater provides warm inviting commercial premises. The ceiling mounting position for this fan assisted heater allows free use of floor and wall space, an important consideration in retail premises!

First class whole life value from a product built to the highest possible standard and designed to give many years of trouble free service – the BN Thermic SCHG30 fan assisted heater is of an excellent quality offering first class heating in shops, retail, changing rooms, entrance areas, etc.

SCHG-30 Fan Assisted Ceiling Heater – Features

  • This SCH heater is installed in a suspended ceiling and allows free use of floor and wall space;
  • Shallow depth: Insert depth of only 153mm;
  • Designed to rest in the T bar of a 600 x 600 suspended ceiling grid;
  • Air inlet and outlet through front panel: no requirement for air supply from the ceiling void;
  • White aluminium egg-crate diffuser;
  • Air flow: 220m3/h; weight: 9kg;
  • Recommended mounting height: 2.5 – 3.0m;
  • Pre-wired to rear mounted terminal enclosure;
  • Auto-reset over-temperature protection;
  • Simple reduction in output by removal of link in rear mounted enclosure (3kW reduced to 2kW);
  • Low running costs by selecting from a range of control options;
  • Specifically designed for quick hassle free installation;
  • More technical specs and wiring / installation instructions (pdf file);
  • Buy online the fan assisted heater for ceiling mounting via SparksDirect.
Related Posts Plugin for WordPress, Blogger...