Manrose 100mm extractor fans, Manrose 4 inch wall, ceiling, or window fans

The Manrose 100mm(4 inch) fans are a series of domestic extractor fans designed for wall, ceiling or window mounting. This comprehensive range of indoor extractor fans offers a wide selection of models for use in bathrooms and toilets. Being quiet and efficient, the Manrose 100mm series of extractor fans has an impressive extract rate of 85m3/hr, 23 litres per second, and is available in the ten options detailed below, together with some other technical details as introduced by Manrose.

Manrose 100mm extractor fans – Ranges and Models

Manrose 100mm (4″) Wall or Ceiling Fans

  • Manrose XF100S - Standard model for remote switching;
  • Manrose XF100P - As above supplied with pullcord switch;
  • Manrose XF100T - Timer model incorporating integral adjustable electronic timer (1-20 mins);
  • Manrose XF100TP - As above but with pullcord override switch. Requires no switched live;
  • Manrose XF100MH - Electro-Mechanical Humidity Control with on/off Switch adjustable 20-90% RH;
  • Manrose XF100MHP - Same as XF100MH but with pullcord switch and neon light;
  • Manrose XF100MHT - As XF100MH but with Electronic Timer;
  • Manrose XF100H - With humidity control which is adjustable between 40% RH and 95% RH; Complete with integral adjustable timer (1-20 mins)
  • Manrose XF100HP - Same as XF100H but with pullcord override switch. Requires no switched live;
  • Manrose XF100PIR - PIR activated model which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch Timer adjustable between 1-20 mins. Requires no switched live.

Manrose 100mm Extractor PAKS with aluminium flexible ducting and wall grille

  • Manrose XP100S - Standard model for remote switching;
  • Manrose XP100P - As above supplied with pullcord switch;
  • Manrose XP100T - Timer model incorporating integral adjustable electronic timer (1-20 mins);
  • Manrose XP100TP - As above but with pullcord override switch. Requires no switched live; Humidity control which is adjustable between 40% RH and 95% RH;
  • Manrose XP100H - Complete with integral adjustable timer (1-20 mins);
  • Manrose XP100HP - As above but with pullcord override switch. Require no switched live;
  • Manrose XP100PIR - PIR activated model which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch Timer adjustable between 1-20 mins. Requires no switched live;

Manrose 100mm Window Fans

  • Manrose WF100P - Pullcord extractor fan for window;
  • Manrose WF100T – Timer window extractor fan incorporating integral adjustable timer (adjustable 1-20 mins); Complete with pullcord switch;
  • Manrose WF100H - Includes humidity control which is adjustable between 40% RH and 95%; Complete with integral adjustable timer (1-20 mins);
  • Manrose WF100PIR - PIR activated window extractor fan which switches on as a person enters the room and runs on after the room is vacated. There is no need to connect to a separate switch. Timer adjustable between 1-20 mins. Requires no switched live;

About the Installation of the Manrose 100 mm/4 inch fans

  • The Manrose XF100 Series – designed for wall mounting (pull-cord version wall mounting only) through 100mm (4″) diameter flexible or rigid pipes or Manrose low profile, flat channel ducting systems.
  • The Manrose XP100 Series – designed for through-wall fixing, supplied with aluminium flexible ducting and external wall grille. Cut out for XP100 kits (112mm/41/2″).
  • The Manrose WF100 Series – designed for window mounting through a standard 115 – 155mm diameter hole.

Electrical data about the Manrose 100mm fans

  • Operating Voltage: 220-240V – AC. 50Hz.
  • Single phase consuming 14 watts.
  • These fans are double insulated and do not require an earth.
  • All wiring must comply with current IEE regulations.
  • A double pole isolating switch, having a contact separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
  • The fan must not be accessible to a person using either the shower or bath and mounted a minimum of 1.8 metres from the floor.

More Technical Details – Manrose 100mm Extractor Fans

  • Maximum pressure: 20 p.a.
  • Fan speed: 2400 r.p.m.
  • Sound volume: 41.0 dB(A)
  • Maximum operating temperature: 40ºC.
  • Dimensions:
    - Manrose XF100T: front length/width 163mm, cutout diameter 98mm, depth 75mm, front plate depth 30mm;
    - Manrose XF100MH: front length/width 163mm, cutout diameter 98mm, depth 67mm, front plate depth 30mm;
    - Manrose XP100: face length/width 163mm, inside diameter 95mm, front plate depth 30mm, total depth 75mm, duct lenght 380mm
    - Manrose WF100: front length/width 163mm, depth 90mm, has a 4-10mm glass plate, 30mm from the front to the glass plate

sss

http://www.sparksdirect.co.uk/ventilation-manrose-extractor-fans-c-75_149_157.html
Related Posts Plugin for WordPress, Blogger...
No TweetBacks yet. (Be the first to Tweet this post)